vs.

      John Deere 655C serie II vs. John Deere 755C serie II

      8 reasons to buy John Deere 655C serie II:

      Operation

      Static tipping load 10470 kg and 13795 kg 24 % less or 3325 kg
      Breakout force in folded state 123.1 kN and 164.9 kN 25 % less or 41.8 kN
      Cooling system fluid volume 68 l. and 57.9 l. 15 % more or 10.1 l.

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev
      Torque measured at 1200 rev / min and 1000 rev / min 17 % more or 200 rev

      Hydraulic system

      Unloading time 1.5 sec and 2.1 sec 29 % less or 0.6 sec

      Carrier

      Specific ground pressure 60 kPa and 75.8 kPa 21 % less or 15.8 kPa
      Track shoes number per side 42 and 39 7 % more or 3

      15 reasons to buy John Deere 755C serie II:

      Sizes

      Width to outside of caterpillar track 2308 mm and 2188 mm 5 % more or 120 mm
      Clearance 426 mm and 395 mm 7 % more or 31 mm
      Ground clearance at full height and unloading 3085 mm and 2827 mm 8 % more or 258 mm

      Operation

      Hydraulic system fluid volume 174.9 l. and 130 l. 26 % more or 44.9 l.
      Fuel Capacity 319.9 l. and 260 l. 19 % more or 59.9 l.
      Bucket capacity with top 2.4 m3 and 1.8 m3 25 % more or 0.6 m3
      Engine oil volume 22 l. and 20 l. 9 % more or 2 l.
      Each final drive fluid volume 68.1 l. and 8.5 l. 88 % more or 59.6 l.

      Motor

      Effective power 132 kW and 96.9 kW 27 % more or 35.1 kW
      Displacement 10 l. and 6.7 l. 33 % more or 3.3 l.
      Maximum torque 919.2 Nm and 610.1 Nm 34 % more or 309.1 Nm
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Lowering time 1.5 sec and 2.1 sec 29 % less or 0.6 sec
      Pump bandwidth 208.2 l/min and 155.2 l/min 25 % more or 53.0 l/min

      Carrier

      Contact with ground area 2.7 m2 and 2.5 m2 7 % more or 0.2 m2

      Neutral reasons:

      Sizes

      Length to front of caterpillar track 4339 mm and 4801 mm
      Length with bucket on ground level 6132 mm and 6832 mm
      Height to cab upper part 3129 mm and 3304 mm
      Radius at high altitude unloading 1072 mm and 1192 mm

      Operation

      Working weight 15399.5 kg and 21001.3 kg
      Operating voltage 24 V and 24 V
      Generator current strength 55 amperes and 55 amperes
      Maximum speed 10.9 km/h and 10.9 km/h

      Motor

      Manufacturer Liebherr and Liebherr
      Model D 924 T-EA1 and D 926 T-EA2
      Aspiration with water-cooling and turbocharging and turbocharging

      Hydraulic system

      Overflow valve pressure 25993.2 kPa and 25993.2 kPa
      Lifting time 6.5 sec and 6.5 sec
      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and Variable displacement piston pump with load sensing proportional pump flow control

      Carrier

      Track width 1680 mm and 1800 mm
      Track shoe width 508 mm and 508 mm
      Rolling bearings number on either side 6 and 6
      Caterpillar track length on ground level 2478 mm and 2673 mm

      Images

      Sizes

      1. Length with bucket on ground level 6132 mm 1. Length with bucket on ground level 6832 mm
      2. Width to outside of caterpillar track 2188 mm 2. Width to outside of caterpillar track 2308 mm
      3. Height to cab upper part 3129 mm 3. Height to cab upper part 3304 mm
      5. Clearance 395 mm 5. Clearance 426 mm
      7. Ground clearance at full height and unloading 2827 mm 7. Ground clearance at full height and unloading 3085 mm
      8. Radius at high altitude unloading 1072 mm 8. Radius at high altitude unloading 1192 mm

      Carrier

      9. Track width 1680 mm 9. Track width 1800 mm