vs.

      John Deere 1050C vs. Dressta TD15M LT

      13 reasons to buy John Deere 1050C:

      Standard blade

      Volume 9.5 m3 and 3.8 m3 60 % more or 5.7 m3

      Sizes

      Clearance 625 mm and 445 mm 29 % more or 180 mm

      Operation

      Engine oil volume 24 l. and 23 l. 4 % more or 1 l.
      Hydraulic system fluid volume 210 l. and 60 l. 71 % more or 150 l.
      Fuel Capacity 610 l. and 388 l. 36 % more or 222 l.
      Power unit fluid volume 210 l. and 153 l. 27 % more or 57 l.
      Cooling system fluid volume 68 l. and 50 l. 26 % more or 18 l.

      Motor

      Effective power 241.6 kW and 142 kW 41 % more or 99.6 kW
      Displacement 13 l. and 8.3 l. 36 % more or 4.7 l.

      Hydraulic system

      Pump bandwidth 336 l/min and 173 l/min 49 % more or 163 l/min

      Gear box

      Maximum forward speed 11 km/h and 10.2 km/h 7 % more or 0.8 km/h

      Carrier

      Track shoes number per side 44 and 43 2 % more or 1
      Contact with ground area 3.6 m2 and 3.1 m2 14 % more or 0.5 m2

      6 reasons to buy Dressta TD15M LT:

      Standard blade

      Cut depth 600 mm and 570 mm 5 % more or 30 mm

      Operation

      Final drive fluid volume 40 l. and 21 l. 47 % more or 19 l.

      Motor

      Torque measured at 1500 rev / min and 1200 rev / min 20 % more or 300 rev

      Gear box

      Maximum reverse gear 11.9 km/h and 11 km/h 8 % more or 0.9 km/h

      Carrier

      Rolling bearings number on either side 8 and 7 12 % more or 1
      Specific ground pressure 65.8 kPa and 93 kPa 29 % less or 27.2 kPa

      Neutral reasons:

      Standard blade

      Width 4200 mm and 4130 mm
      Height 1650 mm and 1120 mm

      Sizes

      Length without blade 4885 mm and 5830 mm
      Width between caterpillar tracks 2740 mm and 2810 mm
      Height to cab upper part 3640 mm and 3450 mm

      Operation

      Working weight 33560 kg and 20260 kg
      Operating voltage 24 V and 12 V

      Motor

      Manufacturer Liebherr and Cummins
      Model D 9406 TI-E and QSC 8.3
      Cylinders number 6 and 6
      Aspiration Turbocharging with intercooler and Turbocharger with charge air cooling

      Hydraulic system

      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and Pump with twin gear, actuated with torque converter.
      Overflow valve pressure 20000 kPa and 17236.9 kPa

      Gear box

      Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow and Power switching of modular of intermediate type.
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 560 mm and 508 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2740 mm 2. Width between caterpillar tracks 2810 mm
      3. Height to cab upper part 3640 mm 3. Height to cab upper part 3450 mm
      5. Clearance 625 mm 5. Clearance 445 mm
      6. Length without blade 4885 mm 6. Length without blade 5830 mm

      Carrier

      8. Standard shoe size 560 mm 8. Standard shoe size 508 mm