vs.

      John Deere 450E/6415 vs. Dressta TD20M

      3 reasons to buy John Deere 450E/6415:

      Gear box

      Reverse gears number 4 and 3 25 % more or 1
      Forward gears number 4 and 3 25 % more or 1

      Carrier

      Specific ground pressure 38.6 kPa and 72.4 kPa 47 % less or 33.8 kPa

      19 reasons to buy Dressta TD20M:

      Sizes

      Clearance 460 mm and 140 mm 70 % more or 320 mm

      Operation

      Fuel Capacity 490 l. and 117.3 l. 76 % more or 372.7 l.
      Cooling system fluid volume 50 l. and 15 l. 70 % more or 35 l.
      Engine oil volume 23 l. and 14.2 l. 38 % more or 8.8 l.
      Hydraulic system fluid volume 133 l. and 36 l. 73 % more or 97 l.
      Power unit fluid volume 173 l. and 30.3 l. 82 % more or 142.7 l.
      Final drive fluid volume 38 l. and 5.9 l. 84 % more or 32.1 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Displacement 8.3 l. and 4.5 l. 46 % more or 3.8 l.
      Torque measured at 1500 rev / min and 1200 rev / min 20 % more or 300 rev
      Cylinders number 6 and 4 33 % more or 2
      Full power 194 kW and 54.4 kW 72 % more or 139.6 kW
      Effective power 179 kW and 52.2 kW 71 % more or 126.8 kW

      Hydraulic system

      Pump bandwidth 2.3 l/min and 1.5 l/min 35 % more or 0.8 l/min

      Gear box

      Maximum forward speed 10.6 km/h and 10.4 km/h 2 % more or 0.2 km/h
      Maximum reverse gear 12.5 km/h and 9.9 km/h 21 % more or 2.6 km/h

      Carrier

      Track shoes number per side 40 and 36 10 % more or 4
      Rolling bearings number on either side 6 and 1 83 % more or 5
      Contact with ground area 3.2 m2 and 1.7 m2 47 % more or 1.5 m2

      Neutral reasons:

      Standard blade

      Width 2440 mm and 3860 mm
      Height 813 mm and 1.6 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 2560 mm and 3570 mm
      Length without blade 3605.8 mm and 4340 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 6655 kg and 24200 kg

      Motor

      Aspiration natural aspiration and Turbocharger with charge air cooling
      Manufacturer John Deere and Cummins
      Model 4-276D and QSC8.3

      Hydraulic system

      Type of pump gear type pump and Numerous gear pumps, actuated with torque converter.
      Overflow valve pressure 2250 lb / sq. inch and 0 lb / sq. inch

      Gear box

      Transmission type H-L-4: 4-speed ranges, with high, reduced reverse speed, switched hydraulically without a clutch in each range and Powershift of modular camshaft, of electrohydraulic action

      Carrier

      Standard shoe size 457 mm and 560 mm

      Images

      Sizes

      3. Height to cab upper part 2560 mm 3. Height to cab upper part 3570 mm
      5. Clearance 140 mm 5. Clearance 460 mm
      6. Length without blade 3605.8 mm 6. Length without blade 4340 mm

      Carrier

      8. Standard shoe size 457 mm 8. Standard shoe size 560 mm