vs.

      John Deere 950C LT vs. Liebherr LR632B L

      7 reasons to buy John Deere 950C LT:

      Standard blade

      Volume 7.2 m3 and 5.6 m3 22 % more or 1.6 m3
      Blade angle in both directions 25 degrees and 10 degrees 60 % more or 15 degrees

      Operation

      Fuel Capacity 450 l. and 400 l. 11 % more or 50 l.
      Cooling system fluid volume 64.4 l. and 62 l. 4 % more or 2.4 l.
      Hydraulic system fluid volume 178 l. and 162 l. 9 % more or 16 l.

      Hydraulic system

      Pump bandwidth 292 l/min and 209 l/min 28 % more or 83 l/min

      Carrier

      Rolling bearings number on either side 8 and 7 12 % more or 1

      7 reasons to buy Liebherr LR632B L:

      Standard blade

      Cut depth 536 mm and 525 mm 2 % more or 11 mm

      Sizes

      Clearance 494 mm and 482 mm 2 % more or 12 mm

      Operation

      Engine oil volume 43 l. and 25.5 l. 41 % more or 17.5 l.
      Final drive fluid volume 16 l. and 14.5 l. 9 % more or 1.5 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Displacement 10.5 l. and 10 l. 5 % more or 0.5 l.

      Carrier

      Specific ground pressure 69.6 kPa and 71 kPa 2 % less or 1.4 kPa

      Neutral reasons:

      Standard blade

      Width 3965 mm and 3372 mm
      Height 1450 mm and 1400 mm

      Sizes

      Caterpillar track length on ground level 3275 mm and 2830 mm
      Length without blade 4300 mm and 4335 mm
      Width between caterpillar tracks 2974 mm and 2381 mm
      Height to cab upper part 3305 mm and 3258 mm

      Operation

      Working weight 23700 kg and 20398 kg
      Operating voltage 24 V and 24 V

      Motor

      Power measured at 1800 rev / min and 1800 rev / min
      Aspiration Turbocharging with intercooler and turbocharging
      Cylinders number 6 and 6
      Manufacturer Liebherr and Liebherr
      Model D 926 TI and D 936 L A6

      Hydraulic system

      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and variable displacement piston pump of axial cam type
      Overflow valve pressure 16000 kPa and 19994.8 kPa

      Gear box

      Maximum forward speed 11 km/h and 11 km/h
      Maximum reverse gear 11 km/h and 11 km/h
      Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow and Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Images

      Sizes

      2. Width between caterpillar tracks 2974 mm 2. Width between caterpillar tracks 2381 mm
      3. Height to cab upper part 3305 mm 3. Height to cab upper part 3258 mm
      4. Caterpillar track length on ground level 3275 mm 4. Caterpillar track length on ground level 2830 mm
      5. Clearance 482 mm 5. Clearance 494 mm
      6. Length without blade 4300 mm 6. Length without blade 4335 mm