vs.

      John Deere 950C vs. Dressta TD7M

      17 reasons to buy John Deere 950C:

      Standard blade

      Cut depth 525 mm and 279 mm 47 % more or 246 mm
      Volume 7.2 m3 and 1.4 m3 81 % more or 5.8 m3

      Sizes

      Clearance 482 mm and 323 mm 33 % more or 159 mm

      Operation

      Fuel Capacity 450 l. and 170 l. 62 % more or 280 l.
      Cooling system fluid volume 64.4 l. and 24.9 l. 61 % more or 39.5 l.
      Hydraulic system fluid volume 178 l. and 70 l. 61 % more or 108 l.
      Power unit fluid volume 178 l. and 70 l. 61 % more or 108 l.
      Final drive fluid volume 14.5 l. and 9.5 l. 34 % more or 5.0 l.

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Effective power 171.5 kW and 55 kW 68 % more or 116.5 kW
      Displacement 10 l. and 4.5 l. 55 % more or 5.5 l.

      Hydraulic system

      Pump bandwidth 292 l/min and 75.2 l/min 74 % more or 216.8 l/min

      Gear box

      Maximum forward speed 11 km/h and 9.2 km/h 16 % more or 1.8 km/h
      Maximum reverse gear 11 km/h and 10.8 km/h 2 % more or 0.2 km/h

      Carrier

      Contact with ground area 3 m2 and 1.4 m2 53 % more or 1.6 m2
      Track shoes number per side 39 and 34 13 % more or 5
      Rolling bearings number on either side 7 and 5 29 % more or 2

      2 reasons to buy Dressta TD7M:

      Motor

      Power measured at 2500 rev / min and 1800 rev / min 28 % more or 700 rev

      Carrier

      Specific ground pressure 51 kPa and 74.5 kPa 32 % less or 23.5 kPa

      Neutral reasons:

      Standard blade

      Width 3965 mm and 2615.2 mm
      Height 1450 mm and 69.9 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3305 mm and 2660 mm
      Length with blade 5680 mm and 4060 mm

      Operation

      Working weight 22950 kg and 7348 kg
      Operating voltage 24 V and 12 V

      Motor

      Torque measured at 1300 rev / min and 1300 rev / min
      Manufacturer Liebherr and Cummins
      Model D926 TI and B4.5
      Aspiration Turbocharging with intercooler and 4-stroke diesel engine, natural aspiration, direct run, direct injection

      Hydraulic system

      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and Pump with double gear
      Overflow valve pressure 16000 kPa and 15512 kPa

      Gear box

      Reverse gears number 3 and 3
      Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow and Modular intermediate type of powershift, electrohydraulic, with 3 forward speeds and 3 reverse speeds
      Forward gears number 3 and 3

      Carrier

      Standard shoe size 508 mm and 381 mm
      Caterpillar track pitch 215.9 mm and 165 mm

      Images

      Sizes

      1. Length with blade 5680 mm 1. Length with blade 4060 mm
      3. Height to cab upper part 3305 mm 3. Height to cab upper part 2660 mm
      5. Clearance 482 mm 5. Clearance 323 mm

      Carrier

      8. Standard shoe size 508 mm 8. Standard shoe size 381 mm