- Home/
- Comparison/
- Tracked Tractor/
- John Deere 950C vs. John Deere 850C LGP
John Deere 950C vs. John Deere 850C LGP
12 reasons to buy John Deere 950C:
Standard blade
Volume | 7.2 m3 and 5.5 m3 | 24 % more or 1.7 m3 |
Cut depth | 525 mm and 429 mm | 18 % more or 96 mm |
Operation
Fuel Capacity | 450 l. and 348 l. | 23 % more or 102 l. |
Hydraulic system fluid volume | 178 l. and 80 l. | 55 % more or 98 l. |
Cooling system fluid volume | 64.4 l. and 34 l. | 47 % more or 30.4 l. |
Power unit fluid volume | 178 l. and 103 l. | 42 % more or 75 l. |
Final drive fluid volume | 14.5 l. and 12.3 l. | 15 % more or 2.2 l. |
Generator current strength | 55 amperes and 45 amperes | 18 % more or 10 amperes |
Motor
Effective power | 171.5 kW and 138 kW | 20 % more or 33.5 kW |
Maximum torque | 1080.6 Nm and 814.8 Nm | 25 % more or 265.8 Nm |
Displacement | 10 l. and 8.1 l. | 19 % more or 1.9 l. |
Hydraulic system
Pump bandwidth | 292 l/min and 166 l/min | 43 % more or 126 l/min |
5 reasons to buy John Deere 850C LGP:
Sizes
Clearance | 483 mm and 482 mm | 0 % more or 1 mm |
Operation
Engine oil volume | 32.2 l. and 25.5 l. | 21 % more or 6.7 l. |
Carrier
Track shoes number per side | 43 and 39 | 9 % more or 4 |
Specific ground pressure | 31.7 kPa and 74.5 kPa | 57 % less or 42.8 kPa |
Contact with ground area | 5.9 m2 and 3 m2 | 49 % more or 2.9 m2 |
Neutral reasons:
Standard blade
Width | 3965 mm and 3978 mm |
Height | 1450 mm and 1113 mm |
Blade angle in both directions | 25 degrees and 25 degrees |
Sizes
Caterpillar track length on ground level | 2960 mm and 3073 mm |
Width between caterpillar tracks | 2489 mm and 3978 mm |
Height to cab upper part | 3305 mm and 3151 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 22950 kg and 19113 kg |
Motor
Manufacturer | Liebherr and John Deere |
Model | D926 TI and 6081A |
Power measured at | 1800 rev / min and 1800 rev / min |
Torque measured at | 1300 rev / min and 1300 rev / min |
Cylinders number | 6 and 6 |
Aspiration | Turbocharging with intercooler and Turbocharging with atmospheric pressure compensation, with the charge air cooling |
Hydraulic system
Type of pump | Variable displacement piston pump with load sensing proportional pump flow control and gear type pump |
Overflow valve pressure | 16000 kPa and 15514 kPa |
Gear box
Transmission type | Electronically controlled closed loop hydrostatic drive with a split power flow and Automatic, hydrostatic drive with a split power flow |
Maximum forward speed | 11 km/h and 11 km/h |
Maximum reverse gear | 11 km/h and 11 km/h |
Carrier
Rolling bearings number on either side | 7 and 7 |
Caterpillar track pitch | 215.9 mm and 203 mm |
Standard shoe size | 508 mm and 965.2 mm |
Images
Sizes
2. Width between caterpillar tracks | 2489 mm | 2. Width between caterpillar tracks | 3978 mm |
3. Height to cab upper part | 3305 mm | 3. Height to cab upper part | 3151 mm |
4. Caterpillar track length on ground level | 2960 mm | 4. Caterpillar track length on ground level | 3073 mm |
5. Clearance | 482 mm | 5. Clearance | 483 mm |
Carrier
8. Standard shoe size | 508 mm | 8. Standard shoe size | 965.2 mm |