John Deere 950C vs. Komatsu D150A-1

2 reasons to buy John Deere 950C:

Maximum reverse gear

11 km/h and 9 km/h

18 % more or 2 km/h

Specific ground pressure

74.5 kPa and 75.5 kPa

1 % less or 1.0 kPa

Volume	10.4 m3 and 7.2 m3	31 % more or 3.2 m3
Cut depth	560 mm and 525 mm	6 % more or 35 mm

Cooling system fluid volume	165 l. and 64.4 l.	61 % more or 100.6 l.
Fuel Capacity	600 l. and 450 l.	25 % more or 150 l.

Displacement

19.3 l. and 10 l.

48 % more or 9.3 l.

Width	3965 mm and 4130 mm
Height	1450 mm and 1590 mm

Length without blade	4300 mm and 5100 mm
Width between caterpillar tracks	2489 mm and 2810 mm
Height to cab upper part	3305 mm and 3640 mm
Caterpillar track length on ground level	2960 mm and 3150 mm

Working weight

22950 kg and 26920.7 kg

Manufacturer	Liebherr and Komatsu
Model	D926 TI and S6D155-4
Aspiration	Turbocharging with intercooler and turbocharging

Transmission type

Electronically controlled closed loop hydrostatic drive with a split power flow and Komatsu TORQFLOW spur gear with full meshing

Rolling bearings number on either side	7 and 7
Track width	1980 mm and 2140 mm
Standard shoe size	508 mm and 560 mm

2. Width between caterpillar tracks	2489 mm	2. Width between caterpillar tracks	2810 mm
3. Height to cab upper part	3305 mm	3. Height to cab upper part	3640 mm
4. Caterpillar track length on ground level	2960 mm	4. Caterpillar track length on ground level	3150 mm
6. Length without blade	4300 mm	6. Length without blade	5100 mm

7. Track width	1980 mm	7. Track width	2140 mm
8. Standard shoe size	508 mm	8. Standard shoe size	560 mm