- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 792D LC vs. Caterpillar 324D L
John Deere 792D LC vs. Caterpillar 324D L
11 reasons to buy John Deere 792D LC:
Swing device
Rotation speed | 12 rev / min and 9.6 rev / min | 20 % more or 2.4 rev |
Sizes
Clearance | 480 mm and 440 mm | 8 % more or 40 mm |
Counterweight ground clearance | 1130 mm and 1060 mm | 6 % more or 70 mm |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Displacement | 7.6 l. and 7.2 l. | 5 % more or 0.4 l. |
Carrier
Hook traction force | 196 kN and 227 kN | 14 % less or 31 kN |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Booms/sections features 2
Maximum radius along ground level | 11150 mm and 9829 mm | 12 % more or 1321 mm |
Maximum loading height | 7330 mm and 6590 mm | 10 % more or 740 mm |
Maximum vertical wall digging depth | 6740 mm and 6075 mm | 10 % more or 665 mm |
Maximum excavation depth | 7870 mm and 6846 mm | 13 % more or 1024 mm |
19 reasons to buy Caterpillar 324D L:
Swing device
Swing torque | 73400 Nm and 7848 Nm | 89 % more or 65552 Nm |
Sizes
Width to outside of caterpillar track | 3390 mm and 3190 mm | 6 % more or 200 mm |
Shovel
Bucket initial volume | 1.4 m3 and 1.3 m3 | 7 % more or 0.1 m3 |
Maximum bucket volume | 2 m3 and 1.6 m3 | 20 % more or 0.4 m3 |
Operation
Cooling system fluid volume | 30 l. and 29 l. | 3 % more or 1 l. |
Engine oil volume | 30 l. and 24 l. | 20 % more or 6 l. |
Boom reach drive mechanism fluid volume | 10 l. and 9.5 l. | 5 % more or 0.5 l. |
Generator current strength | 65 amperes and 45 amperes | 31 % more or 20 amperes |
Hydraulic system overflow valve pressure | 36000 kPa and 34336 kPa | 5 % more or 1664 kPa |
Hydraulic pump flow rate | 440 l/min and 524 l/min | 16 % less or 84 l/min |
Fuel Capacity | 520 l. and 310 l. | 40 % more or 210 l. |
Motor
Full power | 141.7 kW and 129 kW | 9 % more or 12.7 kW |
Effective power | 126 kW and 123 kW | 2 % more or 3 kW |
Carrier
Maximum travel speed | 5.4 km/h and 4.6 km/h | 15 % more or 0.8 km/h |
Track shoes number per side | 51 and 50 | 2 % more or 1 |
Booms/sections features 1
Maximum excavation depth | 7328 mm and 7230 mm | 1 % more or 98 mm |
Maximum radius along ground level | 10549 mm and 10520 mm | 0 % more or 29 mm |
Maximum loading height | 7043 mm and 6980 mm | 1 % more or 63 mm |
Maximum vertical wall digging depth | 6575 mm and 6100 mm | 7 % more or 475 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2990 mm and 2980 mm |
Rear platform swing radius | 3010 mm and 3000 mm |
Caterpillar track length on ground level | 4010 mm and 3830 mm |
Operation
Hydraulic system fluid volume | 300 l. and 300 l. |
Working weight | 27329 kg and 24790 kg |
Motor
Manufacturer | John Deere and Caterpillar |
Model | 6076A and C7 ACERT |
Cylinders number | 6 and 6 |
Carrier
Track width | 2590 mm and 2590 mm |
Shoe dimensions | 600 mm and 800 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 2
Maximum cut height | 10170 mm and 9946 mm |
Unit load-transfer height | 3250 mm and 3170 mm |
Unit load-transfer length | 10470 mm and 10060 mm |
Booms/sections features 1
Unit load-transfer height | 3170 mm and 3430 mm |
Unit load-transfer length | 10450 mm and 10050 mm |
Maximum cut height | 9880 mm and 9887 mm |
Images
Sizes
15. Counterweight ground clearance | 1130 mm | 15. Counterweight ground clearance | 1060 mm |
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 3390 mm |
4. Caterpillar track length on ground level | 4010 mm | 4. Caterpillar track length on ground level | 3830 mm |
5. Clearance | 480 mm | 5. Clearance | 440 mm |
7. Height to cab upper part | 2990 mm | 7. Height to cab upper part | 2980 mm |
8. Rear platform swing radius | 3010 mm | 8. Rear platform swing radius | 3000 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 2590 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
11. Maximum radius along ground level | 11150 mm | 11. Maximum radius along ground level | 9829 mm |
12. Maximum vertical wall digging depth | 6740 mm | 12. Maximum vertical wall digging depth | 6075 mm |
13. Maximum excavation depth | 7870 mm | 13. Maximum excavation depth | 6846 mm |
1. Unit load-transfer length | 10470 mm | 1. Unit load-transfer length | 10100 mm |
3. Unit load-transfer height | 3250 mm | 3. Unit load-transfer height | 3300 mm |
9. Maximum cut height | 10170 mm | 9. Maximum cut height | 9750 mm |
10. Maximum loading height | 7330 mm | 10. Maximum loading height | 6394 mm |