vs.

      Case 885B DHP vs. Caterpillar 160M2

      8 reasons to buy Case 885B DHP:

      Steerage

      Turn radius 7.3 m and 7.8 m 6 % less or 0.5 m

      Sizes

      Rear ground clearance 380 mm and 344 mm 9 % more or 36 mm
      Front part clearance 622 mm and 600 mm 4 % more or 22 mm

      Operation

      Front axle standard operating weight 5668.1 kg and 4236.1 kg 25 % more or 1432.0 kg
      Hydraulic system fluid volume 179.8 l. and 99.9 l. 44 % more or 79.9 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 210.1 l/min 12 % less or 24.6 l/min

      Front Axle

      Clearance 622 mm and 600 mm 4 % more or 22 mm

      15 reasons to buy Caterpillar 160M2:

      Operation

      Generator current strength 150 amperes and 90 amperes 40 % more or 60 amperes
      Fuel Capacity 416.4 l. and 340.7 l. 18 % more or 75.7 l.
      Oil system fluid volume 29.9 l. and 16.7 l. 44 % more or 13.2 l.
      Cooling system fluid volume 56 l. and 39.7 l. 29 % more or 16.3 l.
      Rear axle standard operating weight 13059.8 kg and 12687 kg 3 % more or 372.8 kg
      Transmission fluid volume 65.1 l. and 22 l. 66 % more or 43.1 l.
      Circular gearbox fluid volume 6.8 l. and 2.8 l. 59 % more or 4.0 l.
      Each tandem case fluid volume 64 l. and 60.2 l. 6 % more or 3.8 l.

      Motor

      Effective speeds output 7-8 181.2 kW and 159.6 kW 12 % more or 21.6 kW
      Effective drives torque 7-8 1355.8 Nm and 984.3 Nm 27 % more or 371.5 Nm

      Gear box

      Maximum reverse gear 36.9 km/h and 30.6 km/h 17 % more or 6.3 km/h
      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.7 km/h and 43 km/h 8 % more or 3.7 km/h

      Dump

      Maximum cutting depth 750 mm and 711.2 mm 5 % more or 38.8 mm

      Circle

      Maximum lifting above ground level 452 mm and 444.5 mm 2 % more or 7.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Between tyres width 2650 mm and 2581 mm
      Height to cab upper part 3340 mm and 3287 mm
      Wheelbase 6219 mm and 6126 mm
      Dimensional length 8534 mm and 8898 mm
      Blade base 2562 mm and 2557 mm
      Dual axis wheelbase 1624 mm and 1523 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 18355.1 kg and 17295.9 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Case and Caterpillar
      Model FPT 6.7L and C9.3 ACERT VHP

      Hydraulic system

      Type of pump load sensing, pressure control, with locking in the middle position and variable displacement piston pump

      Gear box

      Transmission type powershift and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 15.3 degrees and 32 degrees

      Dump

      Mouldboard width 4267.2 mm and 4267.2 mm
      Mouldboard height 600 mm and 609.6 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 533.4 mm and 510 mm
      Lateral right shift 685.8 mm and 660 mm
      Lowered blade pressure 9606.2 kg and 10380 kg

      Circle

      Diameter 1752.6 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 8898 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2581 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3287 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6126 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 344 mm
      6. Front part clearance 622 mm 6. Front part clearance 600 mm
      7. Dual axis wheelbase 1624 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2562 mm 8. Blade base 2557 mm