vs.

      Case 885B DHP vs. Volvo G66

      10 reasons to buy Case 885B DHP:

      Operation

      Front axle standard operating weight 5668.1 kg and 1760 kg 69 % more or 3908.1 kg
      Rear axle standard operating weight 12687 kg and 4050 kg 68 % more or 8637 kg
      Fuel Capacity 340.7 l. and 148 l. 57 % more or 192.7 l.
      Cooling system fluid volume 39.7 l. and 17 l. 57 % more or 22.7 l.
      Hydraulic system fluid volume 179.8 l. and 114 l. 37 % more or 65.8 l.
      Rear differential/final drive fluid volume 39.7 l. and 17 l. 57 % more or 22.7 l.

      Motor

      Effective speeds output 7-8 159.6 kW and 63.4 kW 60 % more or 96.2 kW
      Displacement 6.7 l. and 3.9 l. 42 % more or 2.8 l.

      Gear box

      Maximum forward speed 43 km/h and 16.1 km/h 63 % more or 26.9 km/h

      Dump

      Maximum cutting depth 711.2 mm and 254 mm 64 % more or 457.2 mm

      4 reasons to buy Volvo G66:

      Steerage

      Turn radius 5 m and 7.3 m 32 % less or 2.3 m

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Hydraulic system

      Pump flow rate 61 l/min and 185.5 l/min 67 % less or 124.5 l/min

      Gear box

      Maximum reverse gear 32.2 km/h and 30.6 km/h 5 % more or 1.6 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 37 degrees

      Sizes

      Height to cab upper part 3340 mm and 2896 mm
      Blade base 2562 mm and 1880 mm
      Dimensional length 8534 mm and 6350 mm
      Between tyres width 2650 mm and 2184 mm
      Wheelbase 6219 mm and 4674 mm

      Operation

      Overall standard operating weight 18355.1 kg and 5810 kg

      Motor

      Manufacturer Case and Cummins
      Model FPT 6.7L and 4B3.9

      Hydraulic system

      Type of pump load sensing, pressure control, with locking in the middle position and single stream

      Gear box

      Transmission type powershift and hydrostatic

      Dump

      Mouldboard width 4267.2 mm and 3048 mm
      Mouldboard height 600 mm and 482.6 mm
      Mouldboard thickness 22.2 mm and 15.9 mm
      Left lateral displacement 533.4 mm and 1168.4 mm
      Lateral right shift 685.8 mm and 1168.4 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 6350 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2184 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 2896 mm
      4. Wheelbase 6219 mm 4. Wheelbase 4674 mm
      8. Blade base 2562 mm 8. Blade base 1880 mm