vs.

      Caterpillar 120H vs. John Deere 770A

      14 reasons to buy Caterpillar 120H:

      Sizes

      Front part clearance 608 mm and 572 mm 6 % more or 36 mm

      Operation

      Fuel Capacity 340 l. and 265 l. 22 % more or 75 l.
      Oil system fluid volume 23 l. and 18.9 l. 18 % more or 4.1 l.
      Cooling system fluid volume 40 l. and 26.5 l. 34 % more or 13.5 l.
      Circular gearbox fluid volume 7 l. and 3.8 l. 46 % more or 3.2 l.
      Each tandem case fluid volume 49 l. and 18.9 l. 61 % more or 30.1 l.

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Gear box

      Maximum forward speed 42.6 km/h and 40.4 km/h 5 % more or 2.2 km/h
      Maximum reverse gear 33.7 km/h and 13.8 km/h 59 % more or 19.9 km/h
      Reverse gears number 6 and 4 33 % more or 2

      Front Axle

      Clearance 608 mm and 572 mm 6 % more or 36 mm

      Circle

      Maximum radius outside left tyres 1840 mm and 2280 mm 19 % less or 440 mm
      Right maximum radius outside tyres 1912 mm and 2250 mm 15 % less or 338 mm
      Maximum lifting above ground level 457 mm and 432 mm 5 % more or 25 mm

      12 reasons to buy John Deere 770A:

      Steerage

      Turn radius 6.7 m and 7.2 m 7 % less or 0.5 m

      Operation

      Front axle standard operating weight 3877.3 kg and 3574.3 kg 8 % more or 303.0 kg
      Rear axle standard operating weight 9848.4 kg and 8944.8 kg 9 % more or 903.6 kg
      Hydraulic system fluid volume 117 l. and 68 l. 42 % more or 49 l.
      Generator current strength 42 amperes and 35 amperes 17 % more or 7 amperes

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Effective speeds output 7-8 111.9 kW and 104.4 kW 7 % more or 7.5 kW
      Maximum power 111.9 kW and 104.4 kW 7 % more or 7.5 kW
      Displacement 7.6 l. and 6.6 l. 13 % more or 1.0 l.

      Hydraulic system

      Pump flow rate 136.3 l/min and 148 l/min 8 % less or 11.7 l/min

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3110 mm and 3200 mm
      Dimensional length 8140 mm and 8470 mm
      Between tyres width 2440 mm and 2440 mm
      Wheelbase 5870 mm and 5970 mm
      Dual axis wheelbase 1510 mm and 1540 mm

      Operation

      Overall standard operating weight 11358 kg and 13725.7 kg
      Tyre size 13-24 (10 PR) (G-2) and 14.00-25
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Caterpillar and John Deere
      Model 3116 DITA and 6-466A
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with intercooler

      Hydraulic system

      Type of pump Axial-piston pump and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type direct drive, powershift and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3660 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 524 mm and 683 mm
      Lateral right shift 660 mm and 683 mm

      Circle

      Left shift 625 mm and 851 mm
      Right shift 628 mm and 813 mm
      Diameter 1530 mm and 1500 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8140 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3110 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5870 mm 4. Wheelbase 5970 mm
      6. Front part clearance 608 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1510 mm 7. Dual axis wheelbase 1540 mm