vs.

      Caterpillar 120M vs. Case 865 VHP

      8 reasons to buy Caterpillar 120M:

      Operation

      Rear axle standard operating weight 10358 kg and 10342 kg 0 % more or 16 kg
      Rear differential/final drive fluid volume 50 l. and 12 l. 76 % more or 38 l.
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 61 l. and 28.7 l. 53 % more or 32.3 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 44.5 km/h and 42.9 km/h 4 % more or 1.6 km/h
      Maximum reverse gear 37.8 km/h and 28.5 km/h 25 % more or 9.3 km/h

      Dump

      Maximum cutting depth 720 mm and 711.2 mm 1 % more or 8.8 mm

      12 reasons to buy Case 865 VHP:

      Steerage

      Turn radius 7.3 m and 7.5 m 3 % less or 0.2 m

      Sizes

      Rear ground clearance 380 mm and 347 mm 9 % more or 33 mm
      Front part clearance 622 mm and 572 mm 8 % more or 50 mm

      Operation

      Front axle standard operating weight 4293 kg and 3735 kg 13 % more or 558 kg
      Fuel Capacity 340.7 l. and 340 l. 0 % more or 0.7 l.
      Hydraulic system fluid volume 190 l. and 60 l. 68 % more or 130 l.

      Motor

      Displacement 6.7 l. and 6.6 l. 1 % more or 0.1 l.
      Maximum power 152.9 kW and 102.9 kW 33 % more or 50.0 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Effective speeds output 7-8 152.9 kW and 102.9 kW 33 % more or 50.0 kW

      Hydraulic system

      Pump flow rate 143.5 l/min and 151 l/min 5 % less or 7.5 l/min

      Circle

      Maximum lifting above ground level 444.5 mm and 427 mm 4 % more or 17.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3278 mm and 3340 mm
      Dimensional length 8488 mm and 8534 mm
      Between tyres width 2481 mm and 2510 mm
      Wheelbase 5915 mm and 6219 mm
      Blade base 2511 mm and 2562 mm
      Dual axis wheelbase 1511 mm and 1594 mm

      Operation

      Overall standard operating weight 14093 kg and 14635 kg
      Cooling system fluid volume 40 l. and 40 l.

      Motor

      Manufacturer Caterpillar and Cummins
      Model C6.6 ACERT VHP and QSB-6.7, III Level III certified
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 24100 kPa and 0 kPa
      Type of pump variable displacement piston pump and Piston pump with locking in the middle position, with load sensing

      Gear box

      Transmission type direct drive, powershift, camshaft and direct drive, powershift, camshaft
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Left lateral displacement 510 mm and 533 mm
      Lateral right shift 660 mm and 686 mm
      Mouldboard width 3668 mm and 3962 mm
      Mouldboard height 610 mm and 600 mm
      Mouldboard thickness 22 mm and 22.2 mm

      Circle

      Diameter 1530 mm and 1752 mm

      Images

      Sizes

      1. Dimensional length 8488 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2481 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3278 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 5915 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 347 mm 5. Rear ground clearance 380 mm
      6. Front part clearance 572 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1511 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 2511 mm 8. Blade base 2562 mm