vs.

      Caterpillar 120M vs. Caterpillar 12M

      3 reasons to buy Caterpillar 120M:

      Operation

      Front axle maximum operating weight 7399 kg and 6933 kg 6 % more or 466 kg

      Hydraulic system

      Pump flow rate 151 l/min and 193 l/min 22 % less or 42 l/min

      Dump

      Blade pulling at maximum weight 18244 kg and 12004 kg 34 % more or 6240 kg

      6 reasons to buy Caterpillar 12M:

      Operation

      Rear axle standard operating weight 10514 kg and 10358 kg 1 % more or 156 kg
      Rear axle maximum operating weight 13338 kg and 12872 kg 3 % more or 466 kg
      Front axle standard operating weight 4008 kg and 3735 kg 7 % more or 273 kg

      Motor

      Effective speeds output 7-8 129 kW and 102.9 kW 20 % more or 26.1 kW
      Maximum power 129 kW and 102.9 kW 20 % more or 26.1 kW
      Displacement 403 l. and 6.6 l. 98 % more or 396.4 l.

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees
      Turn radius 7.5 m and 7.5 m

      Sizes

      Height to cab upper part 3278 mm and 3278 mm
      Dimensional length 8488 mm and 8488 mm
      Between tyres width 2481 mm and 2481 mm
      Wheelbase 5915 mm and 5915 mm
      Blade base 2511 mm and 2511 mm
      Dual axis wheelbase 1511 mm and 1511 mm
      Rear ground clearance 347 mm and 347 mm
      Front part clearance 572 mm and 572 mm

      Operation

      Overall standard operating weight 14093 kg and 14522 kg
      Total maximum operating weight 20271 kg and 20271 kg
      Fuel Capacity 340 l. and 340 l.
      Cooling system fluid volume 40 l. and 40 l.
      Hydraulic system fluid volume 60 l. and 60 l.
      Rear differential/final drive fluid volume 50 l. and 50 l.
      Circular gearbox fluid volume 7 l. and 7 l.
      Each tandem case fluid volume 61 l. and 61 l.

      Motor

      Manufacturer Caterpillar and Caterpillar
      Model C6.6 ACERT VHP and C6.6 ACERT VHP
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 24100 kPa and 24100 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 6 and 6
      Maximum forward speed 44.5 km/h and 44.5 km/h
      Maximum reverse gear 37.8 km/h and 37.8 km/h
      Transmission type direct drive, powershift, camshaft and direct drive, powershift, camshaft

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees
      Clearance 572 mm and 572 mm

      Dump

      Mouldboard width 3668 mm and 3668 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22 mm
      Maximum cutting depth 720 mm and 720 mm
      Left lateral displacement 510 mm and 510 mm
      Lateral right shift 660 mm and 660 mm
      Lowered blade pressure 13103 kg and 12277 kg

      Circle

      Diameter 1530 mm and 1530 mm
      Right shift 656 mm and 656 mm
      Blade tilt rear angle 5 degrees and 5 degrees
      Left shift 656 mm and 656 mm
      Maximum radius outside left tyres 1742 mm and 1742 mm
      Right maximum radius outside tyres 1905 mm and 1905 mm
      Maximum lifting above ground level 427 mm and 427 mm
      Blade tilt front angle 40 degrees and 40 degrees

      Images

      Sizes

      1. Dimensional length 8488 mm 1. Dimensional length 8488 mm
      2. Between tyres width 2481 mm 2. Between tyres width 2481 mm
      3. Height to cab upper part 3278 mm 3. Height to cab upper part 3278 mm
      4. Wheelbase 5915 mm 4. Wheelbase 5915 mm
      5. Rear ground clearance 347 mm 5. Rear ground clearance 347 mm
      6. Front part clearance 572 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1511 mm 7. Dual axis wheelbase 1511 mm
      8. Blade base 2511 mm 8. Blade base 2511 mm