- Home/
- Comparison/
- Grader/
- Caterpillar 120M vs. Dressta RD200C
Caterpillar 120M vs. Dressta RD200C
8 reasons to buy Caterpillar 120M:
Steerage
Turn radius | 7.5 m and 7500 m | 100 % less or 7492.5 m |
Operation
Each tandem case fluid volume | 61 l. and 30 l. | 51 % more or 31 l. |
Rear differential/final drive fluid volume | 50 l. and 7.5 l. | 85 % more or 42.5 l. |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Reverse gears number | 6 and 3 | 50 % more or 3 |
Maximum reverse gear | 37.8 km/h and 31.4 km/h | 17 % more or 6.4 km/h |
Front Axle
Clearance | 572 mm and 550 mm | 4 % more or 22 mm |
Dump
Maximum cutting depth | 720 mm and 350 mm | 51 % more or 370 mm |
8 reasons to buy Dressta RD200C:
Operation
Fuel Capacity | 380 l. and 340 l. | 11 % more or 40 l. |
Hydraulic system fluid volume | 130 l. and 60 l. | 54 % more or 70 l. |
Motor
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Maximum power | 132.7 kW and 102.9 kW | 22 % more or 29.8 kW |
Displacement | 6.7 l. and 6.6 l. | 1 % more or 0.1 l. |
Hydraulic system
Pump flow rate | 80 l/min and 151 l/min | 47 % less or 71 l/min |
Gear box
Maximum forward speed | 44.7 km/h and 44.5 km/h | 0 % more or 0.2 km/h |
Circle
Maximum lifting above ground level | 500 mm and 427 mm | 15 % more or 73 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 25 degrees |
Sizes
Between tyres width | 2481 mm and 2500 mm |
Wheelbase | 5915 mm and 7300 mm |
Blade base | 2511 mm and 3050 mm |
Dual axis wheelbase | 1511 mm and 1540 mm |
Height to cab upper part | 3278 mm and 3300 mm |
Dimensional length | 8488 mm and 9540 mm |
Operation
Cooling system fluid volume | 40 l. and 40 l. |
Overall standard operating weight | 14093 kg and 36376 kg |
Motor
Manufacturer | Caterpillar and Cummins |
Model | C6.6 ACERT VHP and QSB 6.7 |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | variable displacement piston pump and axial piston pump |
Overflow valve pressure | 24100 kPa and 14000 kPa |
Gear box
Transmission type | direct drive, powershift, camshaft and powershift transmission |
Front Axle
General fluctuations | 32 degrees and 40 degrees |
Wheel tilt | 18 degrees and 22 degrees |
Dump
Mouldboard width | 3668 mm and 3660 mm |
Mouldboard height | 610 mm and 670 mm |
Mouldboard thickness | 22 mm and 22 mm |
Left lateral displacement | 510 mm and 800 mm |
Lateral right shift | 660 mm and 800 mm |
Circle
Diameter | 1530 mm and 1350 mm |
Images
Sizes
1. Dimensional length | 8488 mm | 1. Dimensional length | 9540 mm |
2. Between tyres width | 2481 mm | 2. Between tyres width | 2500 mm |
3. Height to cab upper part | 3278 mm | 3. Height to cab upper part | 3300 mm |
4. Wheelbase | 5915 mm | 4. Wheelbase | 7300 mm |
7. Dual axis wheelbase | 1511 mm | 7. Dual axis wheelbase | 1540 mm |
8. Blade base | 2511 mm | 8. Blade base | 3050 mm |