vs.

      Caterpillar 120M vs. John Deere 770B

      12 reasons to buy Caterpillar 120M:

      Operation

      Rear axle standard operating weight 10358 kg and 10228.5 kg 1 % more or 129.5 kg
      Front axle maximum operating weight 7399 kg and 4477 kg 39 % more or 2922 kg
      Rear axle maximum operating weight 12872 kg and 11602.9 kg 10 % more or 1269.1 kg
      Cooling system fluid volume 40 l. and 38 l. 5 % more or 2 l.
      Circular gearbox fluid volume 7 l. and 3.8 l. 46 % more or 3.2 l.
      Each tandem case fluid volume 61 l. and 18.9 l. 69 % more or 42.1 l.

      Hydraulic system

      Pump flow rate 151 l/min and 198.4 l/min 24 % less or 47.4 l/min

      Gear box

      Maximum forward speed 44.5 km/h and 40.6 km/h 9 % more or 3.9 km/h
      Maximum reverse gear 37.8 km/h and 13.8 km/h 63 % more or 24.0 km/h
      Reverse gears number 6 and 4 33 % more or 2

      Circle

      Maximum radius outside left tyres 1742 mm and 2160 mm 19 % less or 418 mm
      Right maximum radius outside tyres 1905 mm and 2110 mm 10 % less or 205 mm

      10 reasons to buy John Deere 770B:

      Steerage

      Turn radius 6.7 m and 7.5 m 11 % less or 0.8 m

      Operation

      Front axle standard operating weight 3946.3 kg and 3735 kg 5 % more or 211.3 kg
      Fuel Capacity 340.7 l. and 340 l. 0 % more or 0.7 l.
      Hydraulic system fluid volume 87 l. and 60 l. 31 % more or 27 l.

      Motor

      Maximum power 115.6 kW and 102.9 kW 11 % more or 12.7 kW
      Displacement 7.6 l. and 6.6 l. 13 % more or 1.0 l.
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Effective speeds output 7-8 115.6 kW and 102.9 kW 11 % more or 12.7 kW

      Circle

      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees
      Maximum lifting above ground level 470 mm and 427 mm 9 % more or 43 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Between tyres width 2481 mm and 2440 mm
      Wheelbase 5915 mm and 5970 mm
      Blade base 2511 mm and 2670 mm
      Height to cab upper part 3278 mm and 3090 mm
      Dimensional length 8488 mm and 8510 mm
      Dual axis wheelbase 1511 mm and 1540 mm
      Front part clearance 572 mm and 572 mm

      Operation

      Overall standard operating weight 14093 kg and 14174.8 kg
      Total maximum operating weight 20271 kg and 16079.9 kg

      Motor

      Manufacturer Caterpillar and John Deere
      Model C6.6 ACERT VHP and 6076T
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type direct drive, powershift, camshaft and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees
      Clearance 572 mm and 572 mm

      Dump

      Mouldboard width 3668 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 510 mm and 683 mm
      Lateral right shift 660 mm and 683 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1530 mm and 1500 mm
      Left shift 656 mm and 787 mm
      Right shift 656 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 8488 mm 1. Dimensional length 8510 mm
      2. Between tyres width 2481 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3278 mm 3. Height to cab upper part 3090 mm
      4. Wheelbase 5915 mm 4. Wheelbase 5970 mm
      6. Front part clearance 572 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1511 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2511 mm 8. Blade base 2670 mm