- Home/
- Comparison/
- Grader/
- Caterpillar 12H ES vs. New Holland F200
Caterpillar 12H ES vs. New Holland F200
4 reasons to buy Caterpillar 12H ES:
Motor
Displacement | 10.5 l. and 8.3 l. | 21 % more or 2.2 l. |
Gear box
Maximum reverse gear | 31.3 km/h and 30.6 km/h | 2 % more or 0.7 km/h |
Reverse gears number | 6 and 4 | 33 % more or 2 |
Circle
Maximum lifting above ground level | 457 mm and 445 mm | 3 % more or 12 mm |
6 reasons to buy New Holland F200:
Steerage
Turn radius | 7.3 m and 7.4 m | 1 % less or 0.1 m |
Operation
Generator current strength | 70 amperes and 50 amperes | 29 % more or 20 amperes |
Fuel Capacity | 341 l. and 284 l. | 17 % more or 57 l. |
Hydraulic system fluid volume | 95.6 l. and 68 l. | 29 % more or 27.6 l. |
Hydraulic system
Pump flow rate | 186 l/min and 206 l/min | 10 % less or 20 l/min |
Gear box
Maximum forward speed | 43 km/h and 39.7 km/h | 8 % more or 3.3 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 25 degrees |
Sizes
Height to cab upper part | 3110 mm and 3340 mm |
Dimensional length | 8570 mm and 8555 mm |
Between tyres width | 2440 mm and 2650 mm |
Wheelbase | 6090 mm and 6219 mm |
Blade base | 2570 mm and 2562 mm |
Operation
Tyre size | 12-24 10PR (G-2) and 14.00 x 24 (10PR) |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Caterpillar and Cummins |
Model | 3306 DIT and 6 CTAA 8.3 2 level |
Hydraulic system
Type of pump | Axial-piston pump and full hydraulic system with load sensing |
Overflow valve pressure | 24131.6 kPa and 17900 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 32 degrees and 19 degrees |
Dump
Mouldboard width | 3660 mm and 4267 mm |
Mouldboard height | 610 mm and 671 mm |
Mouldboard thickness | 22 mm and 22 mm |
Images
Sizes
1. Dimensional length | 8570 mm | 1. Dimensional length | 8555 mm |
2. Between tyres width | 2440 mm | 2. Between tyres width | 2650 mm |
3. Height to cab upper part | 3110 mm | 3. Height to cab upper part | 3340 mm |
4. Wheelbase | 6090 mm | 4. Wheelbase | 6219 mm |
8. Blade base | 2570 mm | 8. Blade base | 2562 mm |