vs.

      Caterpillar 12H vs. John Deere 672CH

      16 reasons to buy Caterpillar 12H:

      Sizes

      Front part clearance 594 mm and 559 mm 6 % more or 35 mm

      Operation

      Generator current strength 75 amperes and 55 amperes 27 % more or 20 amperes
      Rear axle standard operating weight 10416 kg and 10095 kg 3 % more or 321 kg
      Front axle maximum operating weight 6234 kg and 5071 kg 19 % more or 1163 kg
      Rear axle maximum operating weight 14549 kg and 11732 kg 19 % more or 2817 kg
      Oil system fluid volume 27 l. and 24 l. 11 % more or 3 l.
      Cooling system fluid volume 44 l. and 42 l. 5 % more or 2 l.
      Hydraulic system fluid volume 74 l. and 59 l. 20 % more or 15 l.
      Rear differential/final drive fluid volume 47 l. and 36 l. 23 % more or 11 l.
      Circular gearbox fluid volume 7 l. and 3.8 l. 46 % more or 3.2 l.

      Motor

      Displacement 8.8 l. and 6.8 l. 23 % more or 2.0 l.

      Gear box

      Maximum forward speed 44 km/h and 40.2 km/h 9 % more or 3.8 km/h

      Front Axle

      Clearance 594 mm and 559 mm 6 % more or 35 mm

      Circle

      Right maximum radius outside tyres 1809 mm and 2110 mm 14 % less or 301 mm
      Maximum lifting above ground level 480 mm and 444 mm 7 % more or 36 mm
      Maximum radius outside left tyres 1859 mm and 2160 mm 14 % less or 301 mm

      13 reasons to buy John Deere 672CH:

      Steerage

      Turn radius 6.9 m and 7.4 m 7 % less or 0.5 m

      Operation

      Each tandem case fluid volume 75 l. and 64 l. 15 % more or 11 l.
      Front axle standard operating weight 4563 kg and 3784 kg 17 % more or 779 kg
      Fuel Capacity 403 l. and 378 l. 6 % more or 25 l.

      Motor

      Effective speeds output 5-6 147.6 kW and 123 kW 17 % more or 24.6 kW
      Effective speeds output 7-8 147.6 kW and 123 kW 17 % more or 24.6 kW
      Maximum power 147.6 kW and 123 kW 17 % more or 24.6 kW
      Effective speeds output 3-4 132.7 kW and 123 kW 7 % more or 9.7 kW

      Hydraulic system

      Pump flow rate 173 l/min and 196 l/min 12 % less or 23 l/min

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Maximum reverse gear 40.2 km/h and 34.7 km/h 14 % more or 5.5 km/h

      Dump

      Blade pulling at maximum weight 17827 kg and 13094 kg 27 % more or 4733 kg

      Circle

      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 50 degrees and 25 degrees

      Sizes

      Height to cab upper part 3107 mm and 3100 mm
      Dimensional length 8571 mm and 8580 mm
      Between tyres width 2440 mm and 2460 mm
      Wheelbase 6086 mm and 5970 mm
      Blade base 2575 mm and 2670 mm
      Dual axis wheelbase 1523 mm and 1540 mm

      Operation

      Tyre size 14.00-24 12PR and 13.00-24
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14200 kg and 14658 kg
      Total maximum operating weight 20783 kg and 16803 kg

      Motor

      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6
      Manufacturer Caterpillar and John Deere
      Model C-9 ETA VHP and 6068H
      Effective speeds output 1-2 108 kW and 108 kW

      Hydraulic system

      Overflow valve pressure 24150 kPa and 17581.6 kPa
      Type of pump variable displacement piston pump and Closed center variable displacement piston pump

      Gear box

      Transmission type powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard thickness 22 mm and 22 mm
      Mouldboard width 3658 mm and 3.7 mm
      Mouldboard height 610 mm and 610 mm
      Left lateral displacement 524 mm and 683 mm
      Lateral right shift 660 mm and 683 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1530 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 695 mm and 787 mm
      Right shift 728 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 8571 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 3107 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 6086 mm 4. Wheelbase 5970 mm
      6. Front part clearance 594 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2575 mm 8. Blade base 2670 mm