vs.

      Caterpillar 12H vs. John Deere 672D

      11 reasons to buy Caterpillar 12H:

      Sizes

      Front part clearance 594 mm and 587 mm 1 % more or 7 mm

      Operation

      Circular gearbox fluid volume 7 l. and 5.7 l. 19 % more or 1.3 l.
      Hydraulic system fluid volume 74 l. and 53 l. 28 % more or 21 l.
      Rear differential/final drive fluid volume 47 l. and 36 l. 23 % more or 11 l.

      Motor

      Displacement 8.8 l. and 6.8 l. 23 % more or 2.0 l.

      Hydraulic system

      Pump flow rate 196 l/min and 207 l/min 5 % less or 11 l/min

      Gear box

      Maximum forward speed 44 km/h and 40 km/h 9 % more or 4 km/h

      Front Axle

      Clearance 594 mm and 587 mm 1 % more or 7 mm

      Circle

      Maximum radius outside left tyres 1859 mm and 2100 mm 11 % less or 241 mm
      Right maximum radius outside tyres 1809 mm and 2080 mm 13 % less or 271 mm
      Maximum lifting above ground level 480 mm and 470 mm 2 % more or 10 mm

      15 reasons to buy John Deere 672D:

      Steerage

      Turn radius 7.2 m and 7.4 m 3 % less or 0.2 m

      Operation

      Each tandem case fluid volume 75.7 l. and 64 l. 15 % more or 11.7 l.
      Fuel Capacity 401.2 l. and 378 l. 6 % more or 23.2 l.
      Cooling system fluid volume 45.4 l. and 44 l. 3 % more or 1.4 l.
      Generator current strength 100 amperes and 75 amperes 25 % more or 25 amperes
      Front axle standard operating weight 4358 kg and 3784 kg 13 % more or 574 kg
      Rear axle standard operating weight 10895 kg and 10416 kg 4 % more or 479 kg

      Motor

      Effective speeds output 5-6 138 kW and 123 kW 11 % more or 15 kW
      Maximum power 138 kW and 123 kW 11 % more or 15 kW
      Effective speeds output 7-8 138 kW and 123 kW 11 % more or 15 kW
      Effective speeds output 1-2 123 kW and 108 kW 12 % more or 15 kW

      Gear box

      Maximum reverse gear 40 km/h and 34.7 km/h 13 % more or 5.3 km/h
      Reverse gears number 8 and 6 25 % more or 2

      Dump

      Blade pulling at maximum weight 19105 kg and 13094 kg 31 % more or 6011 kg

      Circle

      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 50 degrees and 22 degrees

      Sizes

      Height to cab upper part 3107 mm and 3180 mm
      Dimensional length 8571 mm and 8804 mm
      Between tyres width 2440 mm and 2490 mm
      Blade base 2575 mm and 2568 mm
      Wheelbase 6086 mm and 6120 mm
      Dual axis wheelbase 1523 mm and 1540 mm

      Operation

      Tyre size 14.00-24 12PR and 14.00R24 Radial PR
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14200 kg and 15254 kg
      Total maximum operating weight 20783 kg and 21228 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and John Deere
      Model C-9 ETA VHP and 6068H
      Effective speeds output 3-4 123 kW and 123 kW
      Power measured at 2000 rev / min and 2000 rev / min

      Hydraulic system

      Overflow valve pressure 24150 kPa and 18960.6 kPa
      Type of pump variable displacement piston pump and variable displacement piston pump

      Gear box

      Transmission type powershift transmission with direct drive and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard width 3658 mm and 3660 mm
      Left lateral displacement 524 mm and 680 mm
      Mouldboard height 610 mm and 610 mm
      Lateral right shift 660 mm and 680 mm
      Mouldboard thickness 22 mm and 22 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 695 mm and 787 mm
      Right shift 728 mm and 724 mm
      Diameter 1530 mm and 1520 mm
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      3. Height to cab upper part 3107 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6086 mm 4. Wheelbase 6120 mm
      6. Front part clearance 594 mm 6. Front part clearance 587 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2575 mm 8. Blade base 2568 mm
      1. Dimensional length 8571 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2490 mm