vs.

      Caterpillar 12H vs. Mitsubishi MG230-E

      12 reasons to buy Caterpillar 12H:

      Operation

      Generator current strength 75 amperes and 40 amperes 47 % more or 35 amperes
      Oil system fluid volume 27 l. and 16 l. 41 % more or 11 l.
      Fuel Capacity 378 l. and 210 l. 44 % more or 168 l.
      Circular gearbox fluid volume 7 l. and 3.5 l. 50 % more or 3.5 l.
      Each tandem case fluid volume 64 l. and 28 l. 56 % more or 36 l.

      Motor

      Maximum power 123 kW and 85.8 kW 30 % more or 37.2 kW
      Displacement 8.8 l. and 5.9 l. 33 % more or 2.9 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 44 km/h and 32.6 km/h 26 % more or 11.4 km/h
      Maximum reverse gear 34.7 km/h and 33.2 km/h 4 % more or 1.5 km/h

      Front Axle

      Clearance 594 mm and 480 mm 19 % more or 114 mm

      Circle

      Maximum lifting above ground level 480 mm and 430 mm 10 % more or 50 mm

      3 reasons to buy Mitsubishi MG230-E:

      Operation

      Hydraulic system fluid volume 110 l. and 74 l. 33 % more or 36 l.

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      Hydraulic system

      Pump flow rate 110 l/min and 196 l/min 44 % less or 86 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 50 degrees and 26 degrees

      Sizes

      Height to cab upper part 3107 mm and 3030 mm
      Dimensional length 8571 mm and 7325 mm
      Between tyres width 2440 mm and 2140 mm
      Wheelbase 6086 mm and 5300 mm
      Blade base 2575 mm and 2185 mm

      Operation

      Tyre size 14.00-24 12PR and 13.00-24-12
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14200 kg and 11060 kg

      Motor

      Manufacturer Caterpillar and Mitsubishi
      Model C-9 ETA VHP and 6D34-TE1
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 24150 kPa and 17.2 kPa
      Type of pump variable displacement piston pump and Pump with double gear

      Gear box

      Transmission type powershift transmission with direct drive and planetary gear
      Reverse gears number 6 and 6

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3658 mm and 3100 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 19 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 695 mm and 1650 mm
      Right shift 728 mm and 1680 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 8571 mm 1. Dimensional length 7325 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2140 mm
      3. Height to cab upper part 3107 mm 3. Height to cab upper part 3030 mm
      4. Wheelbase 6086 mm 4. Wheelbase 5300 mm
      8. Blade base 2575 mm 8. Blade base 2185 mm