vs.

      Caterpillar 12H vs. New Holland F170

      15 reasons to buy Caterpillar 12H:

      Operation

      Front axle maximum operating weight 6234 kg and 4250 kg 32 % more or 1984 kg
      Rear axle maximum operating weight 14549 kg and 10300 kg 29 % more or 4249 kg
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 64 l. and 29 l. 55 % more or 35 l.
      Oil system fluid volume 27 l. and 19 l. 30 % more or 8 l.
      Fuel Capacity 378 l. and 340 l. 10 % more or 38 l.
      Cooling system fluid volume 44 l. and 40 l. 9 % more or 4 l.
      Generator current strength 75 amperes and 70 amperes 7 % more or 5 amperes

      Motor

      Displacement 8.8 l. and 8.3 l. 6 % more or 0.5 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 44 km/h and 43 km/h 2 % more or 1 km/h
      Maximum reverse gear 34.7 km/h and 28.5 km/h 18 % more or 6.2 km/h

      Dump

      Maximum cutting depth 735 mm and 712 mm 3 % more or 23 mm

      Circle

      Right maximum radius outside tyres 1809 mm and 1895 mm 5 % less or 86 mm
      Maximum lifting above ground level 480 mm and 444 mm 7 % more or 36 mm

      7 reasons to buy New Holland F170:

      Steerage

      Turn radius 7.3 m and 7.4 m 1 % less or 0.1 m

      Sizes

      Rear ground clearance 610 mm and 341.5 mm 44 % more or 268.5 mm

      Operation

      Hydraulic system fluid volume 95 l. and 74 l. 22 % more or 21 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 183 l/min and 196 l/min 7 % less or 13 l/min

      Front Axle

      Clearance 622 mm and 594 mm 5 % more or 28 mm

      Circle

      Maximum radius outside left tyres 1735 mm and 1859 mm 7 % less or 124 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 50 degrees and 25 degrees

      Sizes

      Height to cab upper part 3107 mm and 3340 mm
      Dimensional length 8571 mm and 8521 mm
      Between tyres width 2440 mm and 2510 mm
      Wheelbase 6086 mm and 6219 mm
      Blade base 2575 mm and 2562 mm
      Dual axis wheelbase 1523 mm and 1594 mm

      Operation

      Total maximum operating weight 20783 kg and 14550 kg
      Tyre size 14.00-24 12PR and 13.00 x 24 (12PR)
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Cummins
      Model C-9 ETA VHP and 6 CTAA 8.3 2 level

      Hydraulic system

      Type of pump variable displacement piston pump and full hydraulic system with load sensing
      Overflow valve pressure 24150 kPa and 17900 kPa

      Gear box

      Transmission type powershift transmission with direct drive and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Mouldboard width 3658 mm and 3962 mm
      Left lateral displacement 524 mm and 533 mm
      Mouldboard height 610 mm and 671 mm
      Lateral right shift 660 mm and 686 mm
      Mouldboard thickness 22 mm and 22 mm
      Lowered blade pressure 10799 kg and 9356 kg

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Blade tilt front angle 40 degrees and 40 degrees
      Diameter 1530 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2575 mm 8. Blade base 2562 mm
      1. Dimensional length 8571 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3107 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6086 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 341.5 mm 5. Rear ground clearance 610 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1594 mm