vs.

      Caterpillar 12M vs. Case 845B DHP

      11 reasons to buy Caterpillar 12M:

      Operation

      Rear differential/final drive fluid volume 50 l. and 39.7 l. 21 % more or 10.3 l.
      Rear axle standard operating weight 10514 kg and 10109.2 kg 4 % more or 404.8 kg
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 61 l. and 60.2 l. 1 % more or 0.8 l.
      Cooling system fluid volume 40 l. and 39.7 l. 1 % more or 0.3 l.

      Motor

      Effective speeds output 7-8 129 kW and 119.3 kW 8 % more or 9.7 kW
      Displacement 403 l. and 6.7 l. 98 % more or 396.3 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 44.5 km/h and 42.8 km/h 4 % more or 1.7 km/h
      Maximum reverse gear 37.8 km/h and 28.5 km/h 25 % more or 9.3 km/h

      Dump

      Maximum cutting depth 720 mm and 711.2 mm 1 % more or 8.8 mm

      9 reasons to buy Case 845B DHP:

      Steerage

      Turn radius 7.3 m and 7.5 m 3 % less or 0.2 m

      Sizes

      Rear ground clearance 380 mm and 347 mm 9 % more or 33 mm
      Front part clearance 622 mm and 572 mm 8 % more or 50 mm

      Operation

      Hydraulic system fluid volume 179.8 l. and 60 l. 67 % more or 119.8 l.
      Front axle standard operating weight 4496 kg and 4008 kg 11 % more or 488 kg
      Fuel Capacity 340.7 l. and 340 l. 0 % more or 0.7 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 193 l/min 4 % less or 7.5 l/min

      Circle

      Maximum lifting above ground level 444.5 mm and 427 mm 4 % more or 17.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Blade base 2511 mm and 2562 mm
      Dual axis wheelbase 1511 mm and 1572 mm
      Height to cab upper part 3278 mm and 3340 mm
      Dimensional length 8488 mm and 8534.4 mm
      Between tyres width 2481 mm and 2499 mm
      Wheelbase 5915 mm and 6219 mm

      Operation

      Overall standard operating weight 14522 kg and 14605.2 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Case
      Model C6.6 ACERT VHP and FPT 6.7L

      Hydraulic system

      Type of pump variable displacement piston pump and piston type with load sensing

      Gear box

      Transmission type direct drive, powershift, camshaft and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 15.3 degrees

      Dump

      Left lateral displacement 510 mm and 533.4 mm
      Lateral right shift 660 mm and 685.8 mm
      Lowered blade pressure 12277 kg and 7644.8 kg
      Mouldboard width 3668 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 558.8 mm
      Mouldboard thickness 22 mm and 22 mm

      Circle

      Diameter 1530 mm and 1752.6 mm

      Images

      Sizes

      1. Dimensional length 8488 mm 1. Dimensional length 8534.4 mm
      2. Between tyres width 2481 mm 2. Between tyres width 2499 mm
      3. Height to cab upper part 3278 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 5915 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 347 mm 5. Rear ground clearance 380 mm
      6. Front part clearance 572 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1511 mm 7. Dual axis wheelbase 1572 mm
      8. Blade base 2511 mm 8. Blade base 2562 mm