vs.

      Caterpillar 12M vs. Terex TG190

      10 reasons to buy Caterpillar 12M:

      Operation

      Each tandem case fluid volume 61 l. and 42 l. 31 % more or 19 l.
      Circular gearbox fluid volume 7 l. and 6 l. 14 % more or 1 l.

      Motor

      Displacement 403 l. and 6 l. 99 % more or 397 l.

      Gear box

      Maximum forward speed 44.5 km/h and 40 km/h 10 % more or 4.5 km/h
      Maximum reverse gear 37.8 km/h and 19.4 km/h 49 % more or 18.4 km/h
      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 6 and 3 50 % more or 3

      Dump

      Blade pulling at maximum weight 12004 kg and 9835.2 kg 18 % more or 2168.8 kg

      Circle

      Maximum radius outside left tyres 1742 mm and 2220 mm 22 % less or 478 mm
      Right maximum radius outside tyres 1905 mm and 3180 mm 40 % less or 1275 mm

      12 reasons to buy Terex TG190:

      Sizes

      Rear ground clearance 474 mm and 347 mm 27 % more or 127 mm
      Front part clearance 591 mm and 572 mm 3 % more or 19 mm

      Operation

      Front axle standard operating weight 5000 kg and 4008 kg 20 % more or 992 kg
      Rear axle standard operating weight 13700 kg and 10514 kg 23 % more or 3186 kg
      Fuel Capacity 480 l. and 340 l. 29 % more or 140 l.
      Cooling system fluid volume 42 l. and 40 l. 5 % more or 2 l.
      Hydraulic system fluid volume 170 l. and 60 l. 65 % more or 110 l.

      Motor

      Effective speeds output 5-6 138 kW and 129 kW 7 % more or 9 kW
      Maximum power 138 kW and 129 kW 7 % more or 9 kW

      Hydraulic system

      Pump flow rate 99 l/min and 193 l/min 49 % less or 94 l/min

      Front Axle

      Clearance 591 mm and 572 mm 3 % more or 19 mm

      Circle

      Maximum lifting above ground level 470 mm and 427 mm 9 % more or 43 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 45 degrees
      Turn radius 7.5 m and 7.5 m

      Sizes

      Blade base 2511 mm and 2638 mm
      Dual axis wheelbase 1511 mm and 1542 mm
      Height to cab upper part 3278 mm and 3300 mm
      Dimensional length 8488 mm and 10266 mm
      Between tyres width 2481 mm and 2490 mm
      Wheelbase 5915 mm and 6136 mm

      Operation

      Overall standard operating weight 14522 kg and 18700 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Cummins
      Power measured at 2000 rev / min and 2000 rev / min

      Hydraulic system

      Overflow valve pressure 24100 kPa and 18400 kPa
      Type of pump variable displacement piston pump and axial piston pump

      Gear box

      Transmission type direct drive, powershift, camshaft and powershift transmission with torque converter

      Front Axle

      Wheel tilt 18 degrees and 17 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard thickness 22 mm and 20 mm
      Left lateral displacement 510 mm and 1250 mm
      Mouldboard width 3668 mm and 3660 mm
      Lateral right shift 660 mm and 1250 mm
      Mouldboard height 609.6 mm and 630 mm

      Circle

      Diameter 1530 mm and 1510 mm

      Images

      Sizes

      3. Height to cab upper part 3278 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 5915 mm 4. Wheelbase 6136 mm
      5. Rear ground clearance 347 mm 5. Rear ground clearance 474 mm
      6. Front part clearance 572 mm 6. Front part clearance 591 mm
      7. Dual axis wheelbase 1511 mm 7. Dual axis wheelbase 1542 mm
      8. Blade base 2511 mm 8. Blade base 2638 mm
      1. Dimensional length 8488 mm 1. Dimensional length 10266 mm
      2. Between tyres width 2481 mm 2. Between tyres width 2490 mm