- Home/
- Comparison/
- Grader/
- Caterpillar 135H NA vs. John Deere 670D
Caterpillar 135H NA vs. John Deere 670D
3 reasons to buy Caterpillar 135H NA:
Operation
Hydraulic system fluid volume | 68 l. and 53 l. | 22 % more or 15 l. |
Hydraulic system
Pump flow rate | 148 l/min and 207 l/min | 29 % less or 59 l/min |
Gear box
Maximum forward speed | 41.9 km/h and 40 km/h | 5 % more or 1.9 km/h |
10 reasons to buy John Deere 670D:
Steerage
Turn radius | 7 m and 7.2 m | 3 % less or 0.2 m |
Operation
Fuel Capacity | 401.2 l. and 284 l. | 29 % more or 117.2 l. |
Generator current strength | 100 amperes and 35 amperes | 65 % more or 65 amperes |
Motor
Maximum power | 138 kW and 115.6 kW | 16 % more or 22.4 kW |
Displacement | 6.8 l. and 6.6 l. | 3 % more or 0.2 l. |
Effective speeds output 7-8 | 138 kW and 115.6 kW | 16 % more or 22.4 kW |
Effective speeds output 1-2 | 108 kW and 100.7 kW | 7 % more or 7.3 kW |
Gear box
Reverse gears number | 8 and 6 | 25 % more or 2 |
Maximum reverse gear | 40 km/h and 33.1 km/h | 17 % more or 6.9 km/h |
Circle
Maximum lifting above ground level | 470 mm and 457 mm | 3 % more or 13 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 22 degrees |
Sizes
Height to cab upper part | 3110 mm and 3180 mm |
Dimensional length | 8260 mm and 8804 mm |
Between tyres width | 2440 mm and 2510 mm |
Wheelbase | 5870 mm and 6120 mm |
Blade base | 2600 mm and 2568 mm |
Operation
Overall standard operating weight | 12950 kg and 14519 kg |
Tyre size | 13-24 10 PR (G-2) and 14.00-24 12PR |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Caterpillar and John Deere |
Model | 3116 DIT and 6068H |
Hydraulic system
Type of pump | Axial-piston pump and variable displacement piston pump |
Overflow valve pressure | 24131.6 kPa and 18960.6 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 32 degrees and 32 degrees |
Dump
Mouldboard width | 3660 mm and 3660 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 22 mm |
Images
Sizes
4. Wheelbase | 5870 mm | 4. Wheelbase | 6120 mm |
8. Blade base | 2600 mm | 8. Blade base | 2568 mm |
1. Dimensional length | 8260 mm | 1. Dimensional length | 8804 mm |
2. Between tyres width | 2440 mm | 2. Between tyres width | 2510 mm |
3. Height to cab upper part | 3110 mm | 3. Height to cab upper part | 3180 mm |