vs.

      Caterpillar 135H vs. Case 885

      8 reasons to buy Caterpillar 135H:

      Steerage

      Turn radius 7.3 m and 7289 m 100 % less or 7281.7 m

      Operation

      Each tandem case fluid volume 48.1 l. and 22.7 l. 53 % more or 25.4 l.
      Circular gearbox fluid volume 6.8 l. and 2.8 l. 59 % more or 4.0 l.

      Motor

      Displacement 7.2 l. and 6.7 l. 7 % more or 0.5 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 33.2 km/h and 30.6 km/h 8 % more or 2.6 km/h

      Dump

      Maximum cutting depth 775 mm and 711 mm 8 % more or 64 mm

      Circle

      Maximum lifting above ground level 457 mm and 442.5 mm 3 % more or 14.5 mm

      15 reasons to buy Case 885:

      Sizes

      Rear ground clearance 380 mm and 351 mm 8 % more or 29 mm
      Front part clearance 622 mm and 351 mm 44 % more or 271 mm

      Operation

      Cooling system fluid volume 40 l. and 39.4 l. 1 % more or 0.6 l.
      Generator current strength 80 amperes and 35 amperes 56 % more or 45 amperes
      Hydraulic system fluid volume 190 l. and 67 l. 65 % more or 123 l.
      Front axle standard operating weight 5103 kg and 3738.5 kg 27 % more or 1364.5 kg
      Rear axle standard operating weight 12147 kg and 9343.1 kg 23 % more or 2803.9 kg

      Motor

      Effective speeds output 7-8 152.9 kW and 115.6 kW 24 % more or 37.3 kW
      Maximum power 152.9 kW and 115.6 kW 24 % more or 37.3 kW
      Effective drives torque 7-8 881 Nm and 848 Nm 4 % more or 33 Nm
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1500 rev / min and 1000 rev / min 33 % more or 500 rev

      Hydraulic system

      Pump flow rate 143.5 l/min and 144 l/min 0 % less or 0.5 l/min

      Gear box

      Maximum forward speed 43 km/h and 42 km/h 2 % more or 1 km/h

      Front Axle

      Clearance 622 mm and 608 mm 2 % more or 14 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Wheelbase 5923 mm and 6219 mm
      Blade base 2596 mm and 2562 mm
      Dual axis wheelbase 1510 mm and 1602 mm
      Height to cab upper part 3332 mm and 3340 mm
      Dimensional length 10064 mm and 8534 mm
      Between tyres width 2402 mm and 2650 mm

      Operation

      Overall standard operating weight 13081.6 kg and 17250 kg
      Fuel Capacity 340.7 l. and 340.7 l.
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Cummins
      Model 3126B DITA ATAAC VHP and QSB 6.7, III Level III certified

      Hydraulic system

      Overflow valve pressure 24131.6 kPa and 42002.8 kPa
      Type of pump variable displacement piston pump and piston pump

      Gear box

      Transmission type direct drive, powershift and powershift
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 32 degrees and 38 degrees
      Wheel tilt 18 degrees and 17.5 degrees

      Dump

      Mouldboard thickness 22 mm and 22.2 mm
      Mouldboard width 3658 mm and 4267 mm
      Left lateral displacement 524 mm and 533 mm
      Mouldboard height 610 mm and 600 mm
      Lateral right shift 660 mm and 686 mm

      Images

      Sizes

      1. Dimensional length 10064 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2402 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3332 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 5923 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 351 mm 5. Rear ground clearance 380 mm
      6. Front part clearance 351 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1510 mm 7. Dual axis wheelbase 1602 mm
      8. Blade base 2596 mm 8. Blade base 2562 mm