vs.

      Caterpillar 135H vs. Caterpillar 140H

      8 reasons to buy Caterpillar 135H:

      Steerage

      Turn radius 7.3 m and 7.5 m 3 % less or 0.2 m

      Sizes

      Rear ground clearance 351 mm and 344 mm 2 % more or 7 mm

      Operation

      Cooling system fluid volume 39.4 l. and 38 l. 4 % more or 1.4 l.

      Hydraulic system

      Pump flow rate 144 l/min and 206 l/min 30 % less or 62 l/min

      Front Axle

      Clearance 608 mm and 600 mm 1 % more or 8 mm

      Dump

      Maximum cutting depth 775 mm and 715 mm 8 % more or 60 mm

      Circle

      Right maximum radius outside tyres 1912 mm and 1978 mm 3 % less or 66 mm
      Maximum radius outside left tyres 1840 mm and 1896 mm 3 % less or 56 mm

      17 reasons to buy Caterpillar 140H:

      Sizes

      Front part clearance 600 mm and 351 mm 41 % more or 249 mm

      Operation

      Fuel Capacity 397 l. and 340.7 l. 14 % more or 56.3 l.
      Hydraulic system fluid volume 80 l. and 67 l. 16 % more or 13 l.
      Circular gearbox fluid volume 7 l. and 6.8 l. 3 % more or 0.2 l.
      Front axle standard operating weight 4138 kg and 3738.5 kg 10 % more or 399.5 kg
      Each tandem case fluid volume 64 l. and 48.1 l. 25 % more or 15.9 l.
      Rear axle standard operating weight 10539 kg and 9343.1 kg 11 % more or 1195.9 kg

      Motor

      Effective speeds output 7-8 138 kW and 115.6 kW 16 % more or 22.4 kW
      Maximum power 138 kW and 115.6 kW 16 % more or 22.4 kW
      Effective speeds output 1-2 123 kW and 100.7 kW 18 % more or 22.3 kW
      Displacement 10.3 l. and 7.2 l. 30 % more or 3.1 l.
      Effective speeds output 3-4 138 kW and 115.6 kW 16 % more or 22.4 kW
      Effective speeds output 5-6 138 kW and 115.6 kW 16 % more or 22.4 kW

      Gear box

      Maximum forward speed 44 km/h and 42 km/h 5 % more or 2 km/h
      Maximum reverse gear 34.7 km/h and 33.2 km/h 4 % more or 1.5 km/h

      Dump

      Blade pulling at maximum weight 19135 kg and 11505 kg 40 % more or 7630 kg

      Circle

      Maximum lifting above ground level 480 mm and 457 mm 5 % more or 23 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees

      Sizes

      Height to cab upper part 3332 mm and 3131 mm
      Dimensional length 10064 mm and 8713 mm
      Between tyres width 2402 mm and 2464 mm
      Wheelbase 5923 mm and 6169 mm
      Blade base 2596 mm and 2561 mm
      Dual axis wheelbase 1510 mm and 1523 mm

      Operation

      Overall standard operating weight 13081.6 kg and 14677 kg

      Motor

      Manufacturer Caterpillar and Caterpillar
      Model 3126B DITA ATAAC VHP and 3176C DITA ATAAC VHP
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and axial piston
      Overflow valve pressure 24131.6 kPa and 24150 kPa

      Gear box

      Reverse gears number 6 and 6
      Transmission type direct drive, powershift and powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Lowered blade pressure 9822 kg and 13017 kg
      Lateral right shift 660 mm and 660 mm
      Mouldboard width 3658 mm and 3658 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 524 mm and 524 mm

      Circle

      Left shift 625 mm and 695 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Right shift 628 mm and 728 mm
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 10064 mm 1. Dimensional length 8713 mm
      2. Between tyres width 2402 mm 2. Between tyres width 2464 mm
      3. Height to cab upper part 3332 mm 3. Height to cab upper part 3131 mm
      4. Wheelbase 5923 mm 4. Wheelbase 6169 mm
      5. Rear ground clearance 351 mm 5. Rear ground clearance 344 mm
      6. Front part clearance 351 mm 6. Front part clearance 600 mm
      7. Dual axis wheelbase 1510 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2596 mm 8. Blade base 2561 mm