vs.

      Caterpillar 135H vs. John Deere 870D

      7 reasons to buy Caterpillar 135H:

      Operation

      Hydraulic system fluid volume 67 l. and 53 l. 21 % more or 14 l.
      Circular gearbox fluid volume 6.8 l. and 5.7 l. 16 % more or 1.1 l.

      Hydraulic system

      Pump flow rate 144 l/min and 207 l/min 30 % less or 63 l/min

      Gear box

      Maximum forward speed 42 km/h and 41.1 km/h 2 % more or 0.9 km/h

      Circle

      Maximum radius outside left tyres 1840 mm and 2320 mm 21 % less or 480 mm
      Right maximum radius outside tyres 1912 mm and 2310 mm 17 % less or 398 mm
      Maximum lifting above ground level 457 mm and 437 mm 4 % more or 20 mm

      20 reasons to buy John Deere 870D:

      Steerage

      Turn radius 7 m and 7.3 m 4 % less or 0.3 m

      Sizes

      Front part clearance 638 mm and 351 mm 45 % more or 287 mm

      Operation

      Fuel Capacity 401.2 l. and 340.7 l. 15 % more or 60.5 l.
      Cooling system fluid volume 49.2 l. and 39.4 l. 20 % more or 9.8 l.
      Each tandem case fluid volume 75.7 l. and 48.1 l. 36 % more or 27.6 l.
      Front axle standard operating weight 4173 kg and 3738.5 kg 10 % more or 434.5 kg
      Rear axle standard operating weight 11589 kg and 9343.1 kg 19 % more or 2245.9 kg
      Generator current strength 100 amperes and 35 amperes 65 % more or 65 amperes

      Motor

      Effective drives torque 7-8 1238 Nm and 848 Nm 32 % more or 390 Nm
      Displacement 8.1 l. and 7.2 l. 11 % more or 0.9 l.
      Effective speeds output 1-2 134 kW and 100.7 kW 25 % more or 33.3 kW
      Effective speeds output 3-4 138 kW and 115.6 kW 16 % more or 22.4 kW
      Effective speeds output 5-6 149 kW and 115.6 kW 22 % more or 33.4 kW
      Effective speeds output 7-8 175.2 kW and 115.6 kW 34 % more or 59.6 kW
      Maximum power 175.2 kW and 115.6 kW 34 % more or 59.6 kW

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Maximum reverse gear 41.1 km/h and 33.2 km/h 19 % more or 7.9 km/h

      Front Axle

      Clearance 638 mm and 608 mm 5 % more or 30 mm

      Dump

      Blade pulling at maximum weight 13299 kg and 11505 kg 13 % more or 1794 kg

      Circle

      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 22 degrees

      Sizes

      Dual axis wheelbase 1510 mm and 1540 mm
      Wheelbase 5923 mm and 6120 mm
      Blade base 2596 mm and 2533 mm
      Height to cab upper part 3332 mm and 3180 mm
      Dimensional length 10064 mm and 8804 mm
      Between tyres width 2402 mm and 2510 mm

      Operation

      Overall standard operating weight 13081.6 kg and 15760 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Caterpillar and John Deere
      Model 3126B DITA ATAAC VHP and 6081H
      Power measured at 2000 rev / min and 2000 rev / min
      Torque measured at 1000 rev / min and 1000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 24131.6 kPa and 18960.6 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type direct drive, powershift and Powershift transmission with direct drive

      Front Axle

      General fluctuations 32 degrees and 32 degrees
      Wheel tilt 18 degrees and 20 degrees

      Dump

      Lateral right shift 660 mm and 680 mm
      Mouldboard width 3658 mm and 4300 mm
      Mouldboard height 610 mm and 686 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 524 mm and 680 mm

      Circle

      Left shift 625 mm and 787 mm
      Right shift 628 mm and 724 mm
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 10064 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2402 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3332 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 5923 mm 4. Wheelbase 6120 mm
      6. Front part clearance 351 mm 6. Front part clearance 638 mm
      7. Dual axis wheelbase 1510 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2596 mm 8. Blade base 2533 mm