vs.

      Caterpillar 140G vs. John Deere 770AH

      11 reasons to buy Caterpillar 140G:

      Operation

      Fuel Capacity 284 l. and 265 l. 7 % more or 19 l.
      Oil system fluid volume 29.3 l. and 18.9 l. 35 % more or 10.4 l.
      Cooling system fluid volume 47.3 l. and 26.5 l. 44 % more or 20.8 l.

      Motor

      Displacement 10.5 l. and 7.6 l. 28 % more or 2.9 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 41 km/h and 40.4 km/h 1 % more or 0.6 km/h
      Maximum reverse gear 41 km/h and 13.8 km/h 66 % more or 27.2 km/h

      Front Axle

      Clearance 610 mm and 572 mm 6 % more or 38 mm

      Circle

      Maximum radius outside left tyres 1960 mm and 2280 mm 14 % less or 320 mm
      Right maximum radius outside tyres 1830 mm and 2250 mm 19 % less or 420 mm
      Maximum lifting above ground level 464 mm and 432 mm 7 % more or 32 mm

      7 reasons to buy John Deere 770AH:

      Steerage

      Turn radius 6.7 m and 7.3 m 8 % less or 0.6 m

      Operation

      Hydraulic system fluid volume 117.3 l. and 68 l. 42 % more or 49.3 l.
      Generator current strength 42 amperes and 40 amperes 5 % more or 2 amperes

      Motor

      Effective speeds output 5-6 134.2 kW and 111.9 kW 17 % more or 22.3 kW
      Maximum power 134.2 kW and 111.9 kW 17 % more or 22.3 kW

      Hydraulic system

      Pump flow rate 136.3 l/min and 193.1 l/min 29 % less or 56.8 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2

      Neutral reasons:

      Steerage

      Left and right hinge connection 50 degrees and 25 degrees

      Sizes

      Between tyres width 2440 mm and 2440 mm
      Wheelbase 5920 mm and 5970 mm
      Height to cab upper part 3360 mm and 3200 mm
      Blade base 2570 mm and 2720 mm
      Dimensional length 8310 mm and 8470 mm
      Dual axis wheelbase 1520 mm and 1540 mm

      Operation

      Overall standard operating weight 12620 kg and 13725.7 kg
      Tyre size 14x24 10PR and 14
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Caterpillar and John Deere
      Model 3306 and 6-466A
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type powershift transmission with direct drive and powershift

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3660 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 660 mm and 683 mm
      Lateral right shift 660 mm and 683 mm

      Circle

      Diameter 1530 mm and 1500 mm
      Rotating 360 degrees and 360 degrees
      Left shift 650 mm and 851 mm
      Right shift 520 mm and 813 mm

      Images

      Sizes

      7. Dual axis wheelbase 1520 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2570 mm 8. Blade base 2720 mm
      1. Dimensional length 8310 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3360 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5920 mm 4. Wheelbase 5970 mm