vs.

      Caterpillar 140H vs. Caterpillar 143H

      7 reasons to buy Caterpillar 143H:

      Operation

      Front axle standard operating weight 4305 kg and 4138 kg 4 % more or 167 kg
      Rear axle standard operating weight 10965 kg and 10539 kg 4 % more or 426 kg
      Front axle maximum operating weight 7906 kg and 7590 kg 4 % more or 316 kg
      Rear axle maximum operating weight 14240 kg and 13671 kg 4 % more or 569 kg

      Motor

      Maximum power 152.9 kW and 138 kW 10 % more or 14.9 kW
      Effective speeds output 7-8 152.9 kW and 138 kW 10 % more or 14.9 kW

      Dump

      Blade pulling at maximum weight 19931 kg and 19135 kg 4 % more or 796 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees
      Turn radius 7.5 m and 7.5 m

      Sizes

      Dimensional length 8713 mm and 8713 mm
      Between tyres width 2464 mm and 2553 mm
      Height to cab upper part 3131 mm and 3131 mm
      Wheelbase 6169 mm and 6169 mm
      Blade base 2561 mm and 2561 mm
      Dual axis wheelbase 1523 mm and 1523 mm
      Rear ground clearance 344 mm and 344 mm
      Front part clearance 600 mm and 600 mm

      Operation

      Overall standard operating weight 14677 kg and 15270 kg
      Total maximum operating weight 21261 kg and 22146 kg
      Fuel Capacity 397 l. and 397 l.
      Cooling system fluid volume 38 l. and 38 l.
      Hydraulic system fluid volume 80 l. and 80 l.
      Circular gearbox fluid volume 7 l. and 7 l.
      Each tandem case fluid volume 64 l. and 64 l.

      Motor

      Displacement 10.3 l. and 10.3 l.
      Manufacturer Caterpillar and Caterpillar
      Model 3176C DITA ATAAC VHP and 3176C DITA ATAAC VHP
      Effective speeds output 1-2 123 kW and 123 kW
      Effective speeds output 3-4 138 kW and 138 kW
      Effective speeds output 5-6 138 kW and 138 kW

      Hydraulic system

      Type of pump axial piston and axial piston
      Pump flow rate 206 l/min and 206 l/min
      Overflow valve pressure 24150 kPa and 24150 kPa

      Gear box

      Reverse gears number 6 and 6
      Maximum forward speed 44 km/h and 44 km/h
      Maximum reverse gear 34.7 km/h and 34.7 km/h
      Transmission type powershift transmission with direct drive and powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees
      Clearance 600 mm and 600 mm

      Dump

      Mouldboard height 610 mm and 610 mm
      Lateral right shift 660 mm and 660 mm
      Mouldboard thickness 22 mm and 22 mm
      Maximum cutting depth 715 mm and 715 mm
      Left lateral displacement 524 mm and 524 mm
      Lowered blade pressure 13017 kg and 13665 kg
      Mouldboard width 3658 mm and 3658 mm

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1530 mm and 1530 mm
      Left shift 695 mm and 695 mm
      Right shift 728 mm and 728 mm
      Maximum radius outside left tyres 1896 mm and 1896 mm
      Right maximum radius outside tyres 1978 mm and 1978 mm
      Maximum lifting above ground level 480 mm and 480 mm

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 8713 mm
      2. Between tyres width 2464 mm 2. Between tyres width 2553 mm
      3. Height to cab upper part 3131 mm 3. Height to cab upper part 3131 mm
      4. Wheelbase 6169 mm 4. Wheelbase 6169 mm
      5. Rear ground clearance 344 mm 5. Rear ground clearance 344 mm
      6. Front part clearance 600 mm 6. Front part clearance 600 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2561 mm 8. Blade base 2561 mm