vs.

      Caterpillar 140H vs. Caterpillar 14H

      8 reasons to buy Caterpillar 140H:

      Steerage

      Turn radius 7.5 m and 7.9 m 5 % less or 0.4 m

      Operation

      Circular gearbox fluid volume 7 l. and 6 l. 14 % more or 1 l.

      Hydraulic system

      Pump flow rate 206 l/min and 243 l/min 15 % less or 37 l/min

      Gear box

      Maximum forward speed 44 km/h and 42.7 km/h 3 % more or 1.3 km/h

      Dump

      Maximum cutting depth 715 mm and 438 mm 39 % more or 277 mm

      Circle

      Maximum radius outside left tyres 1896 mm and 2057 mm 8 % less or 161 mm
      Right maximum radius outside tyres 1978 mm and 2082 mm 5 % less or 104 mm
      Maximum lifting above ground level 480 mm and 419 mm 13 % more or 61 mm

      19 reasons to buy Caterpillar 14H:

      Sizes

      Rear ground clearance 378 mm and 344 mm 9 % more or 34 mm
      Front part clearance 645 mm and 600 mm 7 % more or 45 mm

      Operation

      Cooling system fluid volume 48.3 l. and 38 l. 21 % more or 10.3 l.
      Front axle maximum operating weight 8811 kg and 7590 kg 14 % more or 1221 kg
      Hydraulic system fluid volume 125 l. and 80 l. 36 % more or 45 l.
      Rear axle maximum operating weight 17729 kg and 13671 kg 23 % more or 4058 kg
      Fuel Capacity 416 l. and 397 l. 5 % more or 19 l.
      Each tandem case fluid volume 98 l. and 64 l. 35 % more or 34 l.
      Front axle standard operating weight 5305 kg and 4138 kg 22 % more or 1167 kg
      Rear axle standard operating weight 13504 kg and 10539 kg 22 % more or 2965 kg

      Motor

      Effective speeds output 1-2 164 kW and 123 kW 25 % more or 41 kW
      Effective speeds output 3-4 179 kW and 138 kW 23 % more or 41 kW
      Effective speeds output 5-6 179 kW and 138 kW 23 % more or 41 kW
      Effective speeds output 7-8 179 kW and 138 kW 23 % more or 41 kW
      Maximum power 179 kW and 138 kW 23 % more or 41 kW

      Gear box

      Maximum reverse gear 47.3 km/h and 34.7 km/h 27 % more or 12.6 km/h
      Reverse gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 645 mm and 600 mm 7 % more or 45 mm

      Dump

      Blade pulling at maximum weight 23886 kg and 19135 kg 20 % more or 4751 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees

      Sizes

      Height to cab upper part 3131 mm and 3339 mm
      Dimensional length 8713 mm and 9342 mm
      Between tyres width 2464 mm and 2817 mm
      Wheelbase 6169 mm and 6460 mm
      Blade base 2561 mm and 2860 mm
      Dual axis wheelbase 1523 mm and 1656 mm

      Operation

      Total maximum operating weight 21261 kg and 26540 kg
      Overall standard operating weight 14677 kg and 18809 kg

      Motor

      Model 3176C DITA ATAAC VHP and 3176 ATAAC
      Manufacturer Caterpillar and Caterpillar
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6
      Displacement 10.3 l. and 10.3 l.

      Hydraulic system

      Type of pump axial piston and axial piston
      Overflow valve pressure 24150 kPa and 24150 kPa

      Gear box

      Transmission type powershift transmission with direct drive and direct drive, powershift, of planetary type
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Lowered blade pressure 13017 kg and 15657 kg
      Mouldboard width 3658 mm and 4267 mm
      Mouldboard height 610 mm and 686 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 524 mm and 650 mm
      Lateral right shift 660 mm and 790 mm

      Circle

      Left shift 695 mm and 650 mm
      Right shift 728 mm and 520 mm
      Diameter 1530 mm and 1822 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 9342 mm
      2. Between tyres width 2464 mm 2. Between tyres width 2817 mm
      3. Height to cab upper part 3131 mm 3. Height to cab upper part 3339 mm
      4. Wheelbase 6169 mm 4. Wheelbase 6460 mm
      5. Rear ground clearance 344 mm 5. Rear ground clearance 378 mm
      6. Front part clearance 600 mm 6. Front part clearance 645 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1656 mm
      8. Blade base 2561 mm 8. Blade base 2860 mm