vs.

      Caterpillar 140H vs. John Deere 672A

      20 reasons to buy Caterpillar 140H:

      Sizes

      Front part clearance 600 mm and 559 mm 7 % more or 41 mm

      Operation

      Rear axle maximum operating weight 13671 kg and 9855 kg 28 % more or 3816 kg
      Front axle standard operating weight 4138 kg and 3947 kg 5 % more or 191 kg
      Fuel Capacity 397 l. and 227 l. 43 % more or 170 l.
      Rear axle standard operating weight 10539 kg and 8460 kg 20 % more or 2079 kg
      Front axle maximum operating weight 7590 kg and 4140 kg 45 % more or 3450 kg
      Cooling system fluid volume 38 l. and 26.5 l. 30 % more or 11.5 l.
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 64 l. and 18.9 l. 70 % more or 45.1 l.

      Motor

      Displacement 10.3 l. and 6.8 l. 34 % more or 3.5 l.
      Effective speeds output 7-8 138 kW and 93.2 kW 32 % more or 44.8 kW
      Maximum power 138 kW and 93.2 kW 32 % more or 44.8 kW

      Gear box

      Maximum forward speed 44 km/h and 38.5 km/h 12 % more or 5.5 km/h
      Maximum reverse gear 34.7 km/h and 12.2 km/h 65 % more or 22.5 km/h
      Reverse gears number 6 and 4 33 % more or 2

      Front Axle

      Clearance 600 mm and 559 mm 7 % more or 41 mm

      Dump

      Maximum cutting depth 715 mm and 152 mm 79 % more or 563 mm

      Circle

      Maximum radius outside left tyres 1896 mm and 2220 mm 15 % less or 324 mm
      Right maximum radius outside tyres 1978 mm and 2150 mm 8 % less or 172 mm
      Maximum lifting above ground level 480 mm and 409 mm 15 % more or 71 mm

      6 reasons to buy John Deere 672A:

      Steerage

      Turn radius 6.9 m and 7.5 m 8 % less or 0.6 m

      Operation

      Hydraulic system fluid volume 143.8 l. and 80 l. 44 % more or 63.8 l.

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Hydraulic system

      Pump flow rate 142.3 l/min and 206 l/min 31 % less or 63.7 l/min

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Dimensional length 8713 mm and 8310 mm
      Between tyres width 2464 mm and 2390 mm
      Wheelbase 6169 mm and 5970 mm
      Blade base 2561 mm and 2540 mm
      Dual axis wheelbase 1523 mm and 1540 mm
      Height to cab upper part 3131 mm and 3200 mm

      Operation

      Total maximum operating weight 21261 kg and 13995 kg
      Overall standard operating weight 14677 kg and 12407 kg

      Motor

      Manufacturer Caterpillar and John Deere
      Model 3176C DITA ATAAC VHP and 6-414T
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston and variable displacement with locking in the middle position

      Gear box

      Transmission type powershift transmission with direct drive and powershift transmission
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3658 mm and 3.7 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 524 mm and 683 mm
      Lateral right shift 660 mm and 683 mm

      Circle

      Diameter 1530 mm and 1.5 mm
      Left shift 695 mm and 874 mm
      Right shift 728 mm and 762 mm

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2464 mm 2. Between tyres width 2390 mm
      3. Height to cab upper part 3131 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6169 mm 4. Wheelbase 5970 mm
      6. Front part clearance 600 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2561 mm 8. Blade base 2540 mm