vs.

      Caterpillar 140H vs. John Deere 770AH

      22 reasons to buy Caterpillar 140H:

      Sizes

      Front part clearance 600 mm and 572 mm 5 % more or 28 mm

      Operation

      Front axle maximum operating weight 7590 kg and 4123.6 kg 46 % more or 3466.4 kg
      Circular gearbox fluid volume 7 l. and 3.8 l. 46 % more or 3.2 l.
      Rear axle maximum operating weight 13671 kg and 11230 kg 18 % more or 2441 kg
      Each tandem case fluid volume 64 l. and 18.9 l. 70 % more or 45.1 l.
      Fuel Capacity 397 l. and 265 l. 33 % more or 132 l.
      Cooling system fluid volume 38 l. and 26.5 l. 30 % more or 11.5 l.
      Front axle standard operating weight 4138 kg and 3877.3 kg 6 % more or 260.7 kg
      Rear axle standard operating weight 10539 kg and 9848.4 kg 7 % more or 690.6 kg

      Motor

      Effective speeds output 7-8 138 kW and 134.2 kW 3 % more or 3.8 kW
      Maximum power 138 kW and 134.2 kW 3 % more or 3.8 kW
      Effective speeds output 1-2 123 kW and 115.6 kW 6 % more or 7.4 kW
      Displacement 10.3 l. and 7.6 l. 26 % more or 2.7 l.
      Effective speeds output 3-4 138 kW and 134.2 kW 3 % more or 3.8 kW
      Effective speeds output 5-6 138 kW and 134.2 kW 3 % more or 3.8 kW

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 44 km/h and 40.4 km/h 8 % more or 3.6 km/h
      Maximum reverse gear 34.7 km/h and 13.8 km/h 60 % more or 20.9 km/h

      Front Axle

      Clearance 600 mm and 572 mm 5 % more or 28 mm

      Circle

      Maximum radius outside left tyres 1896 mm and 2280 mm 17 % less or 384 mm
      Right maximum radius outside tyres 1978 mm and 2250 mm 12 % less or 272 mm
      Maximum lifting above ground level 480 mm and 432 mm 10 % more or 48 mm

      6 reasons to buy John Deere 770AH:

      Steerage

      Turn radius 6.7 m and 7.5 m 11 % less or 0.8 m

      Operation

      Hydraulic system fluid volume 117.3 l. and 80 l. 32 % more or 37.3 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 136.3 l/min and 206 l/min 34 % less or 69.7 l/min

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3131 mm and 3200 mm
      Dimensional length 8713 mm and 8470 mm
      Between tyres width 2464 mm and 2440 mm
      Wheelbase 6169 mm and 5970 mm
      Blade base 2561 mm and 2720 mm
      Dual axis wheelbase 1523 mm and 1540 mm

      Operation

      Total maximum operating weight 21261 kg and 15353.6 kg
      Overall standard operating weight 14677 kg and 13725.7 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and John Deere
      Model 3176C DITA ATAAC VHP and 6-466A

      Hydraulic system

      Type of pump axial piston and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3658 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 524 mm and 683 mm
      Lateral right shift 660 mm and 683 mm

      Circle

      Left shift 695 mm and 851 mm
      Right shift 728 mm and 813 mm
      Diameter 1530 mm and 1500 mm

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2464 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3131 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6169 mm 4. Wheelbase 5970 mm
      6. Front part clearance 600 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2561 mm 8. Blade base 2720 mm