vs.

      Caterpillar 140H vs. Volvo G940

      11 reasons to buy Caterpillar 140H:

      Steerage

      Turn radius 7.5 m and 7265 m 100 % less or 7257.5 m

      Operation

      Cooling system fluid volume 38 l. and 31 l. 18 % more or 7 l.
      Front axle maximum operating weight 7590 kg and 7570 kg 0 % more or 20 kg

      Motor

      Displacement 10.3 l. and 7.2 l. 30 % more or 3.1 l.
      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Hydraulic system

      Pump flow rate 206 l/min and 208 l/min 1 % less or 2 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 34.7 km/h and 32 km/h 8 % more or 2.7 km/h

      Dump

      Blade pulling at maximum weight 19135 kg and 12816 kg 33 % more or 6319 kg

      Circle

      Maximum radius outside left tyres 1896 mm and 2020 mm 6 % less or 124 mm
      Right maximum radius outside tyres 1978 mm and 2010 mm 2 % less or 32 mm

      14 reasons to buy Volvo G940:

      Sizes

      Front part clearance 610 mm and 600 mm 2 % more or 10 mm

      Operation

      Fuel Capacity 404 l. and 397 l. 2 % more or 7 l.
      Front axle standard operating weight 4700 kg and 4138 kg 12 % more or 562 kg
      Rear axle standard operating weight 11700 kg and 10539 kg 10 % more or 1161 kg
      Hydraulic system fluid volume 91 l. and 80 l. 12 % more or 11 l.
      Each tandem case fluid volume 100 l. and 64 l. 36 % more or 36 l.
      Rear axle maximum operating weight 14240 kg and 13671 kg 4 % more or 569 kg

      Motor

      Maximum power 167.8 kW and 138 kW 18 % more or 29.8 kW
      Effective speeds output 7-8 167.8 kW and 138 kW 18 % more or 29.8 kW

      Gear box

      Maximum forward speed 45.4 km/h and 44 km/h 3 % more or 1.4 km/h

      Front Axle

      Clearance 610 mm and 600 mm 2 % more or 10 mm

      Dump

      Maximum cutting depth 787.4 mm and 715 mm 9 % more or 72.4 mm

      Circle

      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees

      Neutral reasons:

      Sizes

      Height to cab upper part 3131 mm and 3225 mm
      Dimensional length 8713 mm and 9150 mm
      Between tyres width 2464 mm and 2537 mm
      Wheelbase 6169 mm and 6280 mm
      Blade base 2561 mm and 2650 mm

      Operation

      Total maximum operating weight 21261 kg and 21320 kg
      Overall standard operating weight 14677 kg and 16400 kg

      Motor

      Manufacturer Caterpillar and Volvo
      Model 3176C DITA ATAAC VHP and D7E
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston and axial piston pump
      Overflow valve pressure 24150 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift transmission with direct drive and HTE840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 16 degrees

      Dump

      Lateral right shift 660 mm and 673 mm
      Mouldboard width 3658 mm and 3657.6 mm
      Lowered blade pressure 13017 kg and 8131 kg
      Mouldboard height 610 mm and 635 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 524 mm and 673 mm

      Circle

      Diameter 1530 mm and 1626 mm
      Left shift 695 mm and 775 mm
      Right shift 728 mm and 749 mm

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2464 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3131 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6169 mm 4. Wheelbase 6280 mm
      6. Front part clearance 600 mm 6. Front part clearance 610 mm
      8. Blade base 2561 mm 8. Blade base 2650 mm