vs.

      Caterpillar 140M2 AWD vs. Case 865 DHP

      17 reasons to buy Caterpillar 140M2 AWD:

      Operation

      Front axle standard operating weight 4392.6 kg and 4250.2 kg 3 % more or 142.4 kg
      Fuel Capacity 416 l. and 341 l. 18 % more or 75 l.
      Rear axle standard operating weight 13710.7 kg and 10299.7 kg 25 % more or 3411.0 kg
      Oil system fluid volume 30 l. and 21.1 l. 30 % more or 8.9 l.
      Cooling system fluid volume 56 l. and 40 l. 29 % more or 16 l.
      Transmission fluid volume 65 l. and 27 l. 58 % more or 38 l.
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 64 l. and 28.7 l. 55 % more or 35.3 l.

      Motor

      Displacement 9.3 l. and 5.9 l. 37 % more or 3.4 l.
      Torque measured at 2100 rev / min and 1500 rev / min 29 % more or 600 rev
      Effective speeds output 7-8 181.2 kW and 149.1 kW 18 % more or 32.1 kW
      Effective drives torque 7-8 1247.4 Nm and 814.8 Nm 35 % more or 432.6 Nm

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 36.8 km/h and 28.5 km/h 23 % more or 8.3 km/h
      Maximum forward speed 46.6 km/h and 42.8 km/h 8 % more or 3.8 km/h

      Dump

      Maximum cutting depth 715 mm and 711.2 mm 1 % more or 3.8 mm

      Circle

      Maximum lifting above ground level 480 mm and 444.5 mm 7 % more or 35.5 mm

      7 reasons to buy Case 865 DHP:

      Steerage

      Turn radius 7.2 m and 7.8 m 8 % less or 0.6 m

      Sizes

      Rear ground clearance 380 mm and 344 mm 9 % more or 36 mm
      Front part clearance 622 mm and 600 mm 4 % more or 22 mm

      Operation

      Hydraulic system fluid volume 180 l. and 100 l. 44 % more or 80 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 210.8 l/min 12 % less or 25.3 l/min

      Front Axle

      Clearance 622 mm and 600 mm 4 % more or 22 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3287 mm and 3340 mm
      Dimensional length 8898 mm and 8534 mm
      Between tyres width 2581 mm and 2510 mm
      Wheelbase 6126 mm and 6219 mm
      Blade base 2557 mm and 2562 mm
      Dual axis wheelbase 1523 mm and 1594 mm

      Operation

      Overall standard operating weight 18103.3 kg and 14549.9 kg

      Motor

      Manufacturer Caterpillar and Cummins
      Model C9.3 ACERT VHP and QSB-5.9

      Hydraulic system

      Type of pump variable displacement piston pump and piston type with load sensing

      Gear box

      Transmission type Powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Mouldboard width 3657.6 mm and 3962 mm
      Mouldboard height 609.6 mm and 600 mm
      Mouldboard thickness 22 mm and 22.2 mm
      Left lateral displacement 510 mm and 533 mm
      Lateral right shift 660 mm and 686 mm
      Lowered blade pressure 10380 kg and 7606 kg

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1530 mm and 1752 mm

      Images

      Sizes

      1. Dimensional length 8898 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2581 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3287 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6126 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 344 mm 5. Rear ground clearance 380 mm
      6. Front part clearance 600 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 2557 mm 8. Blade base 2562 mm