vs.

      Caterpillar 140M2 AWD vs. Caterpillar 140M

      11 reasons to buy Caterpillar 140M2 AWD:

      Sizes

      Rear ground clearance 344 mm and 341 mm 1 % more or 3 mm
      Front part clearance 600 mm and 571 mm 5 % more or 29 mm

      Operation

      Front axle standard operating weight 4392.6 kg and 4161 kg 5 % more or 231.6 kg
      Rear axle standard operating weight 13710.7 kg and 10969 kg 20 % more or 2741.7 kg
      Rear axle maximum operating weight 16530.7 kg and 14954 kg 10 % more or 1576.7 kg
      Cooling system fluid volume 56 l. and 47 l. 16 % more or 9 l.
      Hydraulic system fluid volume 100 l. and 60 l. 40 % more or 40 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Effective speeds output 7-8 181.2 kW and 136.5 kW 25 % more or 44.7 kW
      Displacement 9.3 l. and 7.2 l. 23 % more or 2.1 l.

      Front Axle

      Clearance 600 mm and 571 mm 5 % more or 29 mm

      3 reasons to buy Caterpillar 140M:

      Operation

      Front axle maximum operating weight 8123 kg and 6052.3 kg 25 % more or 2070.7 kg

      Hydraulic system

      Pump flow rate 210 l/min and 210.8 l/min 0 % less or 0.8 l/min

      Dump

      Blade pulling at maximum weight 20769 kg and 9091.8 kg 56 % more or 11677.2 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees
      Turn radius 7.8 m and 7.8 m

      Sizes

      Dimensional length 8898 mm and 8713 mm
      Between tyres width 2581 mm and 2493 mm
      Wheelbase 6126 mm and 6121 mm
      Blade base 2557 mm and 2552 mm
      Dual axis wheelbase 1523 mm and 1523 mm
      Height to cab upper part 3287 mm and 3293 mm

      Operation

      Circular gearbox fluid volume 7 l. and 7 l.
      Each tandem case fluid volume 64 l. and 64 l.
      Overall standard operating weight 18103.3 kg and 15130 kg
      Total maximum operating weight 22583 kg and 23077 kg
      Fuel Capacity 416 l. and 416 l.

      Motor

      Manufacturer Caterpillar and Caterpillar
      Model C9.3 ACERT VHP and C7 ACERT VHP

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 24131.6 kPa and 24150 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 6 and 6
      Transmission type Powershift transmission with direct drive and direct drive, powershift, camshaft
      Maximum forward speed 46.6 km/h and 46.6 km/h
      Maximum reverse gear 36.8 km/h and 36.8 km/h

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard width 3657.6 mm and 3700 mm
      Mouldboard height 609.6 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm
      Maximum cutting depth 715 mm and 715 mm
      Left lateral displacement 510 mm and 510 mm
      Lateral right shift 660 mm and 660 mm

      Circle

      Right maximum radius outside tyres 1978 mm and 1978 mm
      Maximum lifting above ground level 480 mm and 480 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1530 mm and 1530 mm
      Left shift 695 mm and 695 mm
      Right shift 728 mm and 728 mm
      Maximum radius outside left tyres 1790 mm and 1790 mm

      Images

      Sizes

      1. Dimensional length 8898 mm 1. Dimensional length 8713 mm
      2. Between tyres width 2581 mm 2. Between tyres width 2493 mm
      3. Height to cab upper part 3287 mm 3. Height to cab upper part 3293 mm
      4. Wheelbase 6126 mm 4. Wheelbase 6121 mm
      5. Rear ground clearance 344 mm 5. Rear ground clearance 341 mm
      6. Front part clearance 600 mm 6. Front part clearance 571 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2557 mm 8. Blade base 2552 mm