vs.

      Caterpillar 143H vs. John Deere 772CH

      14 reasons to buy Caterpillar 143H:

      Sizes

      Front part clearance 600 mm and 587 mm 2 % more or 13 mm

      Operation

      Front axle maximum operating weight 7906 kg and 5139.2 kg 35 % more or 2766.8 kg
      Rear axle maximum operating weight 14240 kg and 12029.3 kg 16 % more or 2210.7 kg
      Hydraulic system fluid volume 80 l. and 59 l. 26 % more or 21 l.
      Circular gearbox fluid volume 7 l. and 3.8 l. 46 % more or 3.2 l.
      Rear axle standard operating weight 10965 kg and 10391.8 kg 5 % more or 573.2 kg

      Motor

      Displacement 10.3 l. and 8.1 l. 21 % more or 2.2 l.

      Hydraulic system

      Pump flow rate 206 l/min and 207.1 l/min 1 % less or 1.1 l/min

      Gear box

      Maximum forward speed 44 km/h and 41.5 km/h 6 % more or 2.5 km/h

      Front Axle

      Clearance 600 mm and 587 mm 2 % more or 13 mm

      Dump

      Blade pulling at maximum weight 19931 kg and 19894.6 kg 0 % more or 36.4 kg

      Circle

      Maximum lifting above ground level 480 mm and 470 mm 2 % more or 10 mm
      Maximum radius outside left tyres 1896 mm and 2160 mm 12 % less or 264 mm
      Right maximum radius outside tyres 1978 mm and 2110 mm 6 % less or 132 mm

      13 reasons to buy John Deere 772CH:

      Steerage

      Turn radius 6.7 m and 7.5 m 11 % less or 0.8 m

      Operation

      Fuel Capacity 401.3 l. and 397 l. 1 % more or 4.3 l.
      Cooling system fluid volume 45.4 l. and 38 l. 16 % more or 7.4 l.
      Each tandem case fluid volume 75 l. and 64 l. 15 % more or 11 l.
      Front axle standard operating weight 4631.2 kg and 4305 kg 7 % more or 326.2 kg

      Motor

      Effective speeds output 5-6 156.6 kW and 138 kW 12 % more or 18.6 kW
      Effective speeds output 7-8 156.6 kW and 152.9 kW 2 % more or 3.7 kW
      Maximum power 156.6 kW and 152.9 kW 2 % more or 3.7 kW
      Effective speeds output 1-2 134.2 kW and 123 kW 8 % more or 11.2 kW
      Effective speeds output 3-4 149.1 kW and 138 kW 7 % more or 11.1 kW

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Maximum reverse gear 41.5 km/h and 34.7 km/h 16 % more or 6.8 km/h

      Circle

      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Wheelbase 6169 mm and 5970 mm
      Blade base 2561 mm and 2670 mm
      Dual axis wheelbase 1523 mm and 1540 mm
      Height to cab upper part 3131 mm and 3120 mm
      Dimensional length 8713 mm and 8610 mm
      Between tyres width 2553 mm and 2510 mm

      Operation

      Total maximum operating weight 22146 kg and 17168.5 kg
      Overall standard operating weight 15270 kg and 15023 kg

      Motor

      Manufacturer Caterpillar and John Deere
      Model 3176C DITA ATAAC VHP and 6081H

      Hydraulic system

      Type of pump axial piston and variable displacement with locking in the middle position
      Overflow valve pressure 24150 kPa and 17581.6 kPa

      Gear box

      Transmission type powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 524 mm and 683 mm
      Lateral right shift 660 mm and 683 mm
      Mouldboard width 3658 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1530 mm and 1520 mm
      Left shift 695 mm and 787 mm
      Right shift 728 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2553 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3131 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 6169 mm 4. Wheelbase 5970 mm
      6. Front part clearance 600 mm 6. Front part clearance 587 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2561 mm 8. Blade base 2670 mm