- Home/
- Comparison/
- Grader/
- Caterpillar 14H ES vs. John Deere JD770
Caterpillar 14H ES vs. John Deere JD770
8 reasons to buy Caterpillar 14H ES:
Operation
Hydraulic system fluid volume | 125 l. and 117.3 l. | 6 % more or 7.7 l. |
Fuel Capacity | 379 l. and 265 l. | 30 % more or 114 l. |
Motor
Effective speeds output 7-8 | 160.3 kW and 105.9 kW | 34 % more or 54.4 kW |
Maximum power | 160.3 kW and 105.9 kW | 34 % more or 54.4 kW |
Displacement | 10.5 l. and 8.7 l. | 17 % more or 1.8 l. |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum forward speed | 42.7 km/h and 40.4 km/h | 5 % more or 2.3 km/h |
Maximum reverse gear | 47.3 km/h and 13.8 km/h | 71 % more or 33.5 km/h |
2 reasons to buy John Deere JD770:
Steerage
Turn radius | 6.7 m and 7.9 m | 15 % less or 1.2 m |
Hydraulic system
Pump flow rate | 215.8 l/min and 243 l/min | 11 % less or 27.2 l/min |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 25 degrees |
Sizes
Between tyres width | 2820 mm and 2440 mm |
Blade base | 2860 mm and 2720 mm |
Wheelbase | 6460 mm and 5970 mm |
Height to cab upper part | 3340 mm and 3200 mm |
Dimensional length | 9210 mm and 8470 mm |
Operation
Tyre size | 16-24 12PR (G-2) and 14.00-24 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 18784 kg and 13537.5 kg |
Motor
Manufacturer | Caterpillar and John Deere |
Hydraulic system
Overflow valve pressure | 24131.6 kPa and 15513.2 kPa |
Type of pump | Axial-piston pump and variable displacement with locking in the middle position |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 32 degrees and 30 degrees |
Dump
Mouldboard width | 4270 mm and 3657.6 mm |
Mouldboard height | 686 mm and 609.6 mm |
Mouldboard thickness | 25 mm and 22.4 mm |
Images
Sizes
1. Dimensional length | 9210 mm | 1. Dimensional length | 8470 mm |
2. Between tyres width | 2820 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3200 mm |
4. Wheelbase | 6460 mm | 4. Wheelbase | 5970 mm |
8. Blade base | 2860 mm | 8. Blade base | 2720 mm |