vs.

      Caterpillar 14H vs. Case 865B VHP

      10 reasons to buy Caterpillar 14H:

      Sizes

      Front part clearance 645 mm and 622 mm 4 % more or 23 mm

      Operation

      Rear axle standard operating weight 13504 kg and 10824.5 kg 20 % more or 2679.5 kg
      Fuel Capacity 416 l. and 340.7 l. 18 % more or 75.3 l.
      Cooling system fluid volume 48.3 l. and 39.7 l. 18 % more or 8.6 l.
      Circular gearbox fluid volume 6 l. and 2.8 l. 53 % more or 3.2 l.
      Each tandem case fluid volume 98 l. and 60.2 l. 39 % more or 37.8 l.

      Motor

      Effective speeds output 7-8 179 kW and 152.9 kW 15 % more or 26.1 kW
      Displacement 10.3 l. and 6.7 l. 35 % more or 3.6 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 47.3 km/h and 28.5 km/h 40 % more or 18.8 km/h

      10 reasons to buy Case 865B VHP:

      Steerage

      Turn radius 7.3 m and 7.9 m 8 % less or 0.6 m

      Sizes

      Rear ground clearance 380 mm and 378 mm 1 % more or 2 mm

      Operation

      Front axle standard operating weight 5501.6 kg and 5305 kg 4 % more or 196.6 kg
      Hydraulic system fluid volume 190 l. and 125 l. 34 % more or 65 l.
      Transmission fluid volume 94.6 l. and 83 l. 12 % more or 11.6 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 243 l/min 24 % less or 57.5 l/min

      Gear box

      Maximum forward speed 42.8 km/h and 42.7 km/h 0 % more or 0.1 km/h

      Dump

      Maximum cutting depth 711.2 mm and 438 mm 38 % more or 273.2 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 419 mm 6 % more or 25.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3339 mm and 3340 mm
      Dimensional length 9342 mm and 8534 mm
      Between tyres width 2817 mm and 2452 mm
      Wheelbase 6460 mm and 6219 mm
      Blade base 2860 mm and 2562 mm
      Dual axis wheelbase 1656 mm and 1594 mm

      Operation

      Overall standard operating weight 18809 kg and 16326.2 kg

      Motor

      Manufacturer Caterpillar and Case
      Model 3176 ATAAC and FPT 6.7L
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston and piston type with load sensing

      Gear box

      Forward gears number 8 and 8
      Transmission type direct drive, powershift, of planetary type and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 15.3 degrees

      Dump

      Lateral right shift 790 mm and 685.8 mm
      Lowered blade pressure 15657 kg and 9355.8 kg
      Mouldboard width 4267 mm and 4267.2 mm
      Mouldboard height 686 mm and 600 mm
      Mouldboard thickness 25 mm and 22 mm
      Left lateral displacement 650 mm and 533.4 mm

      Circle

      Diameter 1822 mm and 1752.6 mm

      Images

      Sizes

      7. Dual axis wheelbase 1656 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 2860 mm 8. Blade base 2562 mm
      1. Dimensional length 9342 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2817 mm 2. Between tyres width 2452 mm
      3. Height to cab upper part 3339 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6460 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 378 mm 5. Rear ground clearance 380 mm
      6. Front part clearance 645 mm 6. Front part clearance 622 mm