vs.

      Caterpillar 14H vs. John Deere 670D

      22 reasons to buy Caterpillar 14H:

      Sizes

      Front part clearance 645 mm and 638 mm 1 % more or 7 mm

      Operation

      Cooling system fluid volume 48.3 l. and 45.4 l. 6 % more or 2.9 l.
      Hydraulic system fluid volume 125 l. and 53 l. 58 % more or 72 l.
      Front axle standard operating weight 5305 kg and 3855 kg 27 % more or 1450 kg
      Rear axle standard operating weight 13504 kg and 10663 kg 21 % more or 2841 kg
      Transmission fluid volume 83 l. and 22.7 l. 73 % more or 60.3 l.
      Circular gearbox fluid volume 6 l. and 5.7 l. 5 % more or 0.3 l.
      Front axle maximum operating weight 8811 kg and 4413 kg 50 % more or 4398 kg
      Each tandem case fluid volume 98 l. and 75.7 l. 23 % more or 22.3 l.
      Rear axle maximum operating weight 17729 kg and 12728 kg 28 % more or 5001 kg
      Fuel Capacity 416 l. and 401.2 l. 4 % more or 14.8 l.

      Motor

      Effective speeds output 7-8 179 kW and 138 kW 23 % more or 41 kW
      Maximum power 179 kW and 138 kW 23 % more or 41 kW
      Displacement 10.3 l. and 6.8 l. 34 % more or 3.5 l.
      Effective speeds output 1-2 164 kW and 108 kW 34 % more or 56 kW
      Effective speeds output 3-4 179 kW and 123 kW 31 % more or 56 kW
      Effective speeds output 5-6 179 kW and 123 kW 31 % more or 56 kW

      Gear box

      Maximum forward speed 42.7 km/h and 40 km/h 6 % more or 2.7 km/h
      Maximum reverse gear 47.3 km/h and 40 km/h 15 % more or 7.3 km/h

      Front Axle

      Clearance 645 mm and 638 mm 1 % more or 7 mm

      Dump

      Blade pulling at maximum weight 23886 kg and 12800 kg 46 % more or 11086 kg

      Circle

      Maximum radius outside left tyres 2057 mm and 2100 mm 2 % less or 43 mm

      5 reasons to buy John Deere 670D:

      Steerage

      Turn radius 7 m and 7.9 m 11 % less or 0.9 m

      Hydraulic system

      Pump flow rate 207 l/min and 243 l/min 15 % less or 36 l/min

      Circle

      Right maximum radius outside tyres 2080 mm and 2082 mm 0 % less or 2 mm
      Maximum lifting above ground level 470 mm and 419 mm 11 % more or 51 mm
      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 22 degrees

      Sizes

      Height to cab upper part 3339 mm and 3180 mm
      Dimensional length 9342 mm and 8804 mm
      Between tyres width 2817 mm and 2510 mm
      Wheelbase 6460 mm and 6120 mm
      Blade base 2860 mm and 2568 mm
      Dual axis wheelbase 1656 mm and 1540 mm

      Operation

      Overall standard operating weight 18809 kg and 14519 kg
      Total maximum operating weight 26540 kg and 17141 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and John Deere
      Model 3176 ATAAC and 6068H
      Power measured at 2000 rev / min and 2000 rev / min

      Hydraulic system

      Type of pump axial piston and variable displacement piston pump
      Overflow valve pressure 24150 kPa and 18960.6 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 8 and 8
      Transmission type direct drive, powershift, of planetary type and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Left lateral displacement 650 mm and 680 mm
      Lateral right shift 790 mm and 680 mm
      Mouldboard width 4267 mm and 3660 mm
      Mouldboard height 686 mm and 610 mm
      Mouldboard thickness 25 mm and 22 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Left shift 650 mm and 787 mm
      Right shift 520 mm and 724 mm
      Diameter 1822 mm and 1524 mm

      Images

      Sizes

      1. Dimensional length 9342 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2817 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3339 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6460 mm 4. Wheelbase 6120 mm
      6. Front part clearance 645 mm 6. Front part clearance 638 mm
      7. Dual axis wheelbase 1656 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2860 mm 8. Blade base 2568 mm