vs.

      Caterpillar 14H vs. John Deere 772CH

      24 reasons to buy Caterpillar 14H:

      Sizes

      Front part clearance 645 mm and 587 mm 9 % more or 58 mm

      Operation

      Circular gearbox fluid volume 6 l. and 3.8 l. 37 % more or 2.2 l.
      Front axle maximum operating weight 8811 kg and 5139.2 kg 42 % more or 3671.8 kg
      Each tandem case fluid volume 98 l. and 75 l. 23 % more or 23 l.
      Rear axle maximum operating weight 17729 kg and 12029.3 kg 32 % more or 5699.7 kg
      Front axle standard operating weight 5305 kg and 4631.2 kg 13 % more or 673.8 kg
      Fuel Capacity 416 l. and 401.3 l. 4 % more or 14.7 l.
      Rear axle standard operating weight 13504 kg and 10391.8 kg 23 % more or 3112.2 kg
      Cooling system fluid volume 48.3 l. and 45.4 l. 6 % more or 2.9 l.
      Hydraulic system fluid volume 125 l. and 59 l. 53 % more or 66 l.
      Transmission fluid volume 83 l. and 38 l. 54 % more or 45 l.

      Motor

      Effective speeds output 1-2 164 kW and 134.2 kW 18 % more or 29.8 kW
      Effective speeds output 7-8 179 kW and 156.6 kW 13 % more or 22.4 kW
      Effective speeds output 3-4 179 kW and 149.1 kW 17 % more or 29.9 kW
      Maximum power 179 kW and 156.6 kW 13 % more or 22.4 kW
      Power measured at 2000 rev / min and 1900 rev / min 5 % more or 100 rev
      Displacement 10.3 l. and 8.1 l. 21 % more or 2.2 l.
      Effective speeds output 5-6 179 kW and 156.6 kW 13 % more or 22.4 kW

      Gear box

      Maximum forward speed 42.7 km/h and 41.5 km/h 3 % more or 1.2 km/h
      Maximum reverse gear 47.3 km/h and 41.5 km/h 12 % more or 5.8 km/h

      Front Axle

      Clearance 645 mm and 587 mm 9 % more or 58 mm

      Dump

      Blade pulling at maximum weight 23886 kg and 19894.6 kg 17 % more or 3991.4 kg

      Circle

      Maximum radius outside left tyres 2057 mm and 2160 mm 5 % less or 103 mm
      Right maximum radius outside tyres 2082 mm and 2110 mm 1 % less or 28 mm

      4 reasons to buy John Deere 772CH:

      Steerage

      Turn radius 6.7 m and 7.9 m 15 % less or 1.2 m

      Hydraulic system

      Pump flow rate 207.1 l/min and 243 l/min 15 % less or 35.9 l/min

      Circle

      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees
      Maximum lifting above ground level 470 mm and 419 mm 11 % more or 51 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3339 mm and 3120 mm
      Dimensional length 9342 mm and 8610 mm
      Between tyres width 2817 mm and 2510 mm
      Wheelbase 6460 mm and 5970 mm
      Blade base 2860 mm and 2670 mm
      Dual axis wheelbase 1656 mm and 1540 mm

      Operation

      Overall standard operating weight 18809 kg and 15023 kg
      Total maximum operating weight 26540 kg and 17168.5 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and John Deere
      Model 3176 ATAAC and 6081H

      Hydraulic system

      Type of pump axial piston and variable displacement with locking in the middle position
      Overflow valve pressure 24150 kPa and 17581.6 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 8 and 8
      Transmission type direct drive, powershift, of planetary type and powershift

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Left lateral displacement 650 mm and 683 mm
      Lateral right shift 790 mm and 683 mm
      Mouldboard width 4267 mm and 3657.6 mm
      Mouldboard height 686 mm and 609.6 mm
      Mouldboard thickness 25 mm and 22.4 mm

      Circle

      Right shift 520 mm and 724 mm
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1822 mm and 1520 mm
      Left shift 650 mm and 787 mm

      Images

      Sizes

      8. Blade base 2860 mm 8. Blade base 2670 mm
      1. Dimensional length 9342 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2817 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3339 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 6460 mm 4. Wheelbase 5970 mm
      6. Front part clearance 645 mm 6. Front part clearance 587 mm
      7. Dual axis wheelbase 1656 mm 7. Dual axis wheelbase 1540 mm