- Home/
- Comparison/
- Grader/
- Caterpillar 14H vs. Volvo G726B
Caterpillar 14H vs. Volvo G726B
13 reasons to buy Caterpillar 14H:
Operation
Front axle standard operating weight | 5305 kg and 4657 kg | 12 % more or 648 kg |
Rear axle standard operating weight | 13504 kg and 11401 kg | 16 % more or 2103 kg |
Fuel Capacity | 416 l. and 378.5 l. | 9 % more or 37.5 l. |
Cooling system fluid volume | 48.3 l. and 28 l. | 42 % more or 20.3 l. |
Transmission fluid volume | 83 l. and 38 l. | 54 % more or 45 l. |
Motor
Maximum power | 179 kW and 175.2 kW | 2 % more or 3.8 kW |
Displacement | 10.3 l. and 7.1 l. | 31 % more or 3.2 l. |
Effective speeds output 7-8 | 179 kW and 175.2 kW | 2 % more or 3.8 kW |
Hydraulic system
Pump flow rate | 243 l/min and 284 l/min | 14 % less or 41 l/min |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum reverse gear | 47.3 km/h and 32.8 km/h | 31 % more or 14.5 km/h |
Front Axle
Clearance | 645 mm and 610 mm | 5 % more or 35 mm |
Dump
Blade pulling at maximum weight | 23886 kg and 10260.7 kg | 57 % more or 13625.3 kg |
10 reasons to buy Volvo G726B:
Operation
Each tandem case fluid volume | 100 l. and 98 l. | 2 % more or 2 l. |
Hydraulic system fluid volume | 134 l. and 125 l. | 7 % more or 9 l. |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Gear box
Maximum forward speed | 45.9 km/h and 42.7 km/h | 7 % more or 3.2 km/h |
Dump
Maximum cutting depth | 812.8 mm and 438 mm | 46 % more or 374.8 mm |
Circle
Maximum radius outside left tyres | 2019.3 mm and 2057 mm | 2 % less or 37.7 mm |
Right maximum radius outside tyres | 2006.6 mm and 2082 mm | 4 % less or 75.4 mm |
Maximum lifting above ground level | 444.5 mm and 419 mm | 6 % more or 25.5 mm |
Blade tilt front angle | 44 degrees and 40 degrees | 9 % more or 4 degrees |
Blade tilt rear angle | 6.5 degrees and 5 degrees | 23 % more or 1.5 degrees |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 22 degrees |
Sizes
Height to cab upper part | 3339 mm and 3099 mm |
Dimensional length | 9342 mm and 9119 mm |
Between tyres width | 2817 mm and 2540 mm |
Wheelbase | 6460 mm and 6096 mm |
Blade base | 2860 mm and 2591 mm |
Operation
Overall standard operating weight | 18809 kg and 16057 kg |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Caterpillar and Volvo |
Model | 3176 ATAAC and D7DGDE2 |
Hydraulic system
Type of pump | axial piston and hydraulic system with load sensing |
Overflow valve pressure | 24150 kPa and 2700 kPa |
Gear box
Transmission type | direct drive, powershift, of planetary type and powershift transmission |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 15 degrees |
General fluctuations | 32 degrees and 16 degrees |
Dump
Lateral right shift | 790 mm and 673.1 mm |
Lowered blade pressure | 15657 kg and 8098.4 kg |
Mouldboard width | 4267 mm and 3657.6 mm |
Mouldboard height | 686 mm and 635 mm |
Mouldboard thickness | 25 mm and 22.2 mm |
Left lateral displacement | 650 mm and 673.1 mm |
Circle
Right shift | 520 mm and 749.3 mm |
Diameter | 1822 mm and 1683 mm |
Left shift | 650 mm and 774.7 mm |
Images
Sizes
1. Dimensional length | 9342 mm | 1. Dimensional length | 9119 mm |
2. Between tyres width | 2817 mm | 2. Between tyres width | 2540 mm |
3. Height to cab upper part | 3339 mm | 3. Height to cab upper part | 3099 mm |
4. Wheelbase | 6460 mm | 4. Wheelbase | 6096 mm |
8. Blade base | 2860 mm | 8. Blade base | 2591 mm |