vs.

      Caterpillar 14M vs. Mitsubishi MG530-E

      7 reasons to buy Caterpillar 14M:

      Operation

      Fuel Capacity 492 l. and 275 l. 44 % more or 217 l.
      Transmission fluid volume 89 l. and 32 l. 64 % more or 57 l.
      Circular gearbox fluid volume 6 l. and 3.5 l. 42 % more or 2.5 l.
      Each tandem case fluid volume 96.5 l. and 85 l. 12 % more or 11.5 l.

      Motor

      Maximum power 204.3 kW and 138 kW 32 % more or 66.3 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 49.8 km/h and 46.6 km/h 6 % more or 3.2 km/h

      6 reasons to buy Mitsubishi MG530-E:

      Operation

      Hydraulic system fluid volume 67 l. and 60 l. 10 % more or 7 l.

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Hydraulic system

      Pump flow rate 100 l/min and 280 l/min 64 % less or 180 l/min

      Gear box

      Maximum reverse gear 47.5 km/h and 39.4 km/h 17 % more or 8.1 km/h

      Circle

      Maximum lifting above ground level 460 mm and 419 mm 9 % more or 41 mm
      Blade tilt rear angle 9 degrees and 5 degrees 44 % more or 4 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 26 degrees

      Sizes

      Wheelbase 6559 mm and 6250 mm
      Blade base 2842 mm and 2670 mm
      Height to cab upper part 3535 mm and 3140 mm
      Dimensional length 9412 mm and 8745 mm
      Between tyres width 2791 mm and 2665 mm

      Operation

      Overall standard operating weight 21379 kg and 18225 kg

      Motor

      Manufacturer Caterpillar and Mitsubishi
      Model C11 ACERT VHP and 6D22-T
      Cylinders number 6 and 6
      Displacement 11.1 l. and 11.1 l.

      Hydraulic system

      Overflow valve pressure 24150 kPa and 17.2 kPa
      Type of pump variable displacement piston pump and Pump with double gear

      Gear box

      Transmission type direct drive, powershift, camshaft and planetary gear
      Reverse gears number 6 and 6

      Front Axle

      Wheel tilt 17.1 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard height 688 mm and 720 mm
      Mouldboard thickness 25 mm and 22 mm

      Circle

      Left shift 650 mm and 2325 mm
      Right shift 520 mm and 2195 mm
      Blade tilt front angle 40 degrees and 40 degrees

      Images

      Sizes

      1. Dimensional length 9412 mm 1. Dimensional length 8745 mm
      2. Between tyres width 2791 mm 2. Between tyres width 2665 mm
      3. Height to cab upper part 3535 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 6559 mm 4. Wheelbase 6250 mm
      8. Blade base 2842 mm 8. Blade base 2670 mm