vs.

      Caterpillar 160H vs. Case 845 DHP

      15 reasons to buy Caterpillar 160H:

      Operation

      Each tandem case fluid volume 64 l. and 28.7 l. 55 % more or 35.3 l.
      Front axle standard operating weight 4589 kg and 3707 kg 19 % more or 882 kg
      Rear axle standard operating weight 11691 kg and 9828 kg 16 % more or 1863 kg
      Fuel Capacity 397 l. and 340.7 l. 14 % more or 56.3 l.
      Rear differential/final drive fluid volume 47 l. and 12 l. 74 % more or 35 l.
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.

      Motor

      Effective drives torque 7-8 1140 Nm and 746 Nm 35 % more or 394 Nm
      Displacement 10.3 l. and 6.7 l. 35 % more or 3.6 l.
      Effective speeds output 7-8 149.1 kW and 119 kW 20 % more or 30.1 kW
      Maximum power 149.1 kW and 119.3 kW 20 % more or 29.8 kW

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 43.6 km/h and 42.9 km/h 2 % more or 0.7 km/h
      Maximum reverse gear 34.4 km/h and 28.5 km/h 17 % more or 5.9 km/h

      Dump

      Maximum cutting depth 770 mm and 711.2 mm 8 % more or 58.8 mm

      Circle

      Maximum lifting above ground level 452 mm and 444.5 mm 2 % more or 7.5 mm

      7 reasons to buy Case 845 DHP:

      Steerage

      Turn radius 7.2 m and 7.4 m 3 % less or 0.2 m

      Operation

      Generator current strength 80 amperes and 35 amperes 56 % more or 45 amperes
      Cooling system fluid volume 40 l. and 38 l. 5 % more or 2 l.
      Hydraulic system fluid volume 180 l. and 80 l. 56 % more or 100 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1500 rev / min and 1000 rev / min 33 % more or 500 rev

      Hydraulic system

      Pump flow rate 191.5 l/min and 260 l/min 26 % less or 68.5 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Between tyres width 2460 mm and 2510 mm
      Wheelbase 6169 mm and 6219 mm
      Dual axis wheelbase 1523 mm and 1594 mm
      Height to cab upper part 3356 mm and 3340 mm
      Dimensional length 10097 mm and 8534 mm

      Operation

      Tyre size 10-24 12PR and 14.0 x 24 12PR TL G2 Firestone
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16280 kg and 13535 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Cummins
      Model 3176C ATAAC and QSB 6.7, III Level III certified

      Hydraulic system

      Type of pump Axial-piston pump and Gear pump with locking in the middle position, with load sensing

      Gear box

      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Mouldboard height 686 mm and 559 mm
      Mouldboard thickness 25 mm and 22.2 mm
      Left lateral displacement 851 mm and 533 mm
      Lateral right shift 943 mm and 686 mm
      Mouldboard width 4267 mm and 3658 mm

      Images

      Sizes

      1. Dimensional length 10097 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3356 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6169 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1594 mm