- Home/
- Comparison/
- Grader/
- Caterpillar 160H vs. Caterpillar 160M2
Caterpillar 160H vs. Caterpillar 160M2
7 reasons to buy Caterpillar 160H:
Steerage
Turn radius | 7.4 m and 7.8 m | 5 % less or 0.4 m |
Operation
Front axle maximum operating weight | 8311 kg and 6052.3 kg | 27 % more or 2258.7 kg |
Front axle standard operating weight | 4589 kg and 4236.1 kg | 8 % more or 352.9 kg |
Circular gearbox fluid volume | 7 l. and 6.8 l. | 3 % more or 0.2 l. |
Dump
Blade pulling at maximum weight | 20071 kg and 9091.8 kg | 55 % more or 10979.2 kg |
Maximum cutting depth | 770 mm and 750 mm | 3 % more or 20 mm |
Circle
Right maximum radius outside tyres | 2261 mm and 2278 mm | 1 % less or 17 mm |
14 reasons to buy Caterpillar 160M2:
Operation
Rear axle standard operating weight | 13059.8 kg and 11691 kg | 10 % more or 1368.8 kg |
Generator current strength | 150 amperes and 35 amperes | 77 % more or 115 amperes |
Rear axle maximum operating weight | 16530.7 kg and 14970 kg | 9 % more or 1560.7 kg |
Fuel Capacity | 416.4 l. and 397 l. | 5 % more or 19.4 l. |
Cooling system fluid volume | 56 l. and 38 l. | 32 % more or 18 l. |
Hydraulic system fluid volume | 99.9 l. and 80 l. | 20 % more or 19.9 l. |
Motor
Effective drives torque 7-8 | 1355.8 Nm and 1140 Nm | 16 % more or 215.8 Nm |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Torque measured at | 2100 rev / min and 1000 rev / min | 52 % more or 1100 rev |
Effective speeds output 7-8 | 181.2 kW and 149.1 kW | 18 % more or 32.1 kW |
Hydraulic system
Pump flow rate | 210.1 l/min and 260 l/min | 19 % less or 49.9 l/min |
Gear box
Maximum forward speed | 46.7 km/h and 43.6 km/h | 7 % more or 3.1 km/h |
Maximum reverse gear | 36.9 km/h and 34.4 km/h | 7 % more or 2.5 km/h |
Circle
Maximum radius outside left tyres | 2090 mm and 2223 mm | 6 % less or 133 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 20 degrees |
Sizes
Dual axis wheelbase | 1523 mm and 1523 mm |
Height to cab upper part | 3356 mm and 3287 mm |
Dimensional length | 10097 mm and 8898 mm |
Between tyres width | 2460 mm and 2581 mm |
Wheelbase | 6169 mm and 6126 mm |
Operation
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 16280 kg and 17295.9 kg |
Total maximum operating weight | 23281 kg and 23947.4 kg |
Each tandem case fluid volume | 64 l. and 64 l. |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Caterpillar and Caterpillar |
Model | 3176C ATAAC and C9.3 ACERT VHP |
Hydraulic system
Type of pump | Axial-piston pump and variable displacement piston pump |
Overflow valve pressure | 24150 kPa and 24152.3 kPa |
Gear box
Reverse gears number | 6 and 6 |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 32 degrees and 32 degrees |
Dump
Lateral right shift | 943 mm and 660 mm |
Mouldboard thickness | 25 mm and 22 mm |
Lowered blade pressure | 13808 kg and 10380 kg |
Left lateral displacement | 851 mm and 510 mm |
Mouldboard width | 4267 mm and 4267.2 mm |
Mouldboard height | 686 mm and 609.6 mm |
Circle
Maximum lifting above ground level | 452 mm and 452 mm |
Blade tilt front angle | 40 degrees and 40 degrees |
Blade tilt rear angle | 5 degrees and 5 degrees |
Left shift | 848 mm and 695 mm |
Right shift | 881 mm and 728 mm |
Images
Sizes
1. Dimensional length | 10097 mm | 1. Dimensional length | 8898 mm |
2. Between tyres width | 2460 mm | 2. Between tyres width | 2581 mm |
3. Height to cab upper part | 3356 mm | 3. Height to cab upper part | 3287 mm |
4. Wheelbase | 6169 mm | 4. Wheelbase | 6126 mm |
7. Dual axis wheelbase | 1523 mm | 7. Dual axis wheelbase | 1523 mm |