vs.

      Caterpillar 160H vs. Caterpillar 16H

      5 reasons to buy Caterpillar 160H:

      Steerage

      Turn radius 7.4 m and 8.2 m 10 % less or 0.8 m

      Dump

      Maximum cutting depth 770 mm and 470 mm 39 % more or 300 mm

      Circle

      Right maximum radius outside tyres 2261 mm and 2311 mm 2 % less or 50 mm
      Maximum lifting above ground level 452 mm and 419 mm 7 % more or 33 mm
      Maximum radius outside left tyres 2223 mm and 2311 mm 4 % less or 88 mm

      23 reasons to buy Caterpillar 16H:

      Operation

      Front axle standard operating weight 6982 kg and 4589 kg 34 % more or 2393 kg
      Rear axle standard operating weight 17758 kg and 11691 kg 34 % more or 6067 kg
      Front axle maximum operating weight 8846 kg and 8311 kg 6 % more or 535 kg
      Rear axle maximum operating weight 22746 kg and 14970 kg 34 % more or 7776 kg
      Fuel Capacity 492 l. and 397 l. 19 % more or 95 l.
      Cooling system fluid volume 46.5 l. and 38 l. 18 % more or 8.5 l.
      Hydraulic system fluid volume 129 l. and 80 l. 38 % more or 49 l.
      Rear differential/final drive fluid volume 114 l. and 47 l. 59 % more or 67 l.
      Circular gearbox fluid volume 8 l. and 7 l. 12 % more or 1 l.
      Each tandem case fluid volume 121 l. and 64 l. 47 % more or 57 l.
      Generator current strength 75 amperes and 35 amperes 53 % more or 40 amperes

      Motor

      Effective drives torque 7-8 1550 Nm and 1140 Nm 26 % more or 410 Nm
      Displacement 11.9 l. and 10.3 l. 13 % more or 1.6 l.
      Effective speeds output 1-2 198 kW and 134.2 kW 32 % more or 63.8 kW
      Effective speeds output 3-4 212.5 kW and 149.1 kW 30 % more or 63.4 kW
      Effective speeds output 5-6 212.5 kW and 149.1 kW 30 % more or 63.4 kW
      Effective speeds output 7-8 212.5 kW and 149.1 kW 30 % more or 63.4 kW
      Maximum power 212.5 kW and 149.1 kW 30 % more or 63.4 kW

      Hydraulic system

      Pump flow rate 254 l/min and 260 l/min 2 % less or 6 l/min

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Maximum forward speed 48.1 km/h and 43.6 km/h 9 % more or 4.5 km/h
      Maximum reverse gear 45.7 km/h and 34.4 km/h 25 % more or 11.3 km/h

      Dump

      Blade pulling at maximum weight 20471 kg and 20071 kg 2 % more or 400 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees

      Sizes

      Height to cab upper part 3356 mm and 3524 mm
      Dimensional length 10097 mm and 9994 mm
      Between tyres width 2460 mm and 3077 mm
      Wheelbase 6169 mm and 6960 mm
      Dual axis wheelbase 1523 mm and 1841 mm

      Operation

      Overall standard operating weight 16280 kg and 24740 kg
      Total maximum operating weight 23281 kg and 31592 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Caterpillar and Caterpillar
      Model 3176C ATAAC and 3196 ETA
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Axial-piston pump and axial piston
      Overflow valve pressure 24150 kPa and 24150 kPa

      Gear box

      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard width 4267 mm and 4877 mm
      Mouldboard height 686 mm and 787 mm
      Mouldboard thickness 25 mm and 25 mm
      Left lateral displacement 851 mm and 650 mm
      Lateral right shift 943 mm and 790 mm
      Lowered blade pressure 13808 kg and 15831 kg

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Left shift 848 mm and 690 mm
      Right shift 881 mm and 560 mm

      Images

      Sizes

      1. Dimensional length 10097 mm 1. Dimensional length 9994 mm
      2. Between tyres width 2460 mm 2. Between tyres width 3077 mm
      3. Height to cab upper part 3356 mm 3. Height to cab upper part 3524 mm
      4. Wheelbase 6169 mm 4. Wheelbase 6960 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1841 mm