vs.

      Caterpillar 160H vs. Fiat-Hitachi FG105A

      18 reasons to buy Caterpillar 160H:

      Operation

      Front axle maximum operating weight 8311 kg and 4380 kg 47 % more or 3931 kg
      Rear axle maximum operating weight 14970 kg and 11670 kg 22 % more or 3300 kg
      Fuel Capacity 397 l. and 299 l. 25 % more or 98 l.
      Cooling system fluid volume 38 l. and 27 l. 29 % more or 11 l.
      Rear differential/final drive fluid volume 47 l. and 42 l. 11 % more or 5 l.
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 64 l. and 30.3 l. 53 % more or 33.7 l.

      Motor

      Maximum power 149.1 kW and 147 kW 1 % more or 2.1 kW
      Effective drives torque 7-8 1140 Nm and 753 Nm 34 % more or 387 Nm
      Displacement 10.3 l. and 8.3 l. 19 % more or 2.0 l.
      Effective speeds output 5-6 149.1 kW and 147 kW 1 % more or 2.1 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 6 and 3 50 % more or 3
      Maximum forward speed 43.6 km/h and 42 km/h 4 % more or 1.6 km/h
      Maximum reverse gear 34.4 km/h and 27.4 km/h 20 % more or 7.0 km/h

      Dump

      Maximum cutting depth 770 mm and 165 mm 79 % more or 605 mm

      Circle

      Maximum radius outside left tyres 2223 mm and 2657 mm 16 % less or 434 mm
      Right maximum radius outside tyres 2261 mm and 2733 mm 17 % less or 472 mm

      8 reasons to buy Fiat-Hitachi FG105A:

      Steerage

      Turn radius 7.2 m and 7.4 m 3 % less or 0.2 m

      Operation

      Generator current strength 45 amperes and 35 amperes 22 % more or 10 amperes
      Hydraulic system fluid volume 94.6 l. and 80 l. 15 % more or 14.6 l.

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev
      Torque measured at 1500 rev / min and 1000 rev / min 33 % more or 500 rev

      Hydraulic system

      Pump flow rate 163 l/min and 260 l/min 37 % less or 97 l/min

      Circle

      Maximum lifting above ground level 622 mm and 452 mm 27 % more or 170 mm
      Blade tilt rear angle 27.5 degrees and 5 degrees 82 % more or 22.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Wheelbase 6169 mm and 1538 mm
      Dual axis wheelbase 1523 mm and 5969 mm
      Height to cab upper part 3356 mm and 3340 mm
      Dimensional length 10097 mm and 8521 mm
      Between tyres width 2460 mm and 2540 mm

      Operation

      Tyre size 10-24 12PR and 13X24(10PR)
      Operating voltage 24 V and 24 V
      Total maximum operating weight 23281 kg and 16050 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Cummins
      Model 3176C ATAAC and 6 CT8.3

      Hydraulic system

      Overflow valve pressure 24150 kPa and 2857 kPa
      Type of pump Axial-piston pump and fully oil-actuated, variable displacement piston pump

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Mouldboard width 4267 mm and 2762 mm
      Mouldboard height 686 mm and 953 mm
      Left lateral displacement 851 mm and 533 mm
      Lateral right shift 943 mm and 685 mm
      Lowered blade pressure 13808 kg and 7790 kg

      Images

      Sizes

      1. Dimensional length 10097 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3356 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6169 mm 4. Wheelbase 1538 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 5969 mm