vs.

      Caterpillar 160H vs. John Deere 770CH

      15 reasons to buy Caterpillar 160H:

      Operation

      Front axle maximum operating weight 8311 kg and 4495.1 kg 46 % more or 3815.9 kg
      Rear axle maximum operating weight 14970 kg and 11938.6 kg 20 % more or 3031.4 kg
      Hydraulic system fluid volume 80 l. and 59 l. 26 % more or 21 l.
      Front axle standard operating weight 4589 kg and 3987.1 kg 13 % more or 601.9 kg
      Rear differential/final drive fluid volume 47 l. and 36 l. 23 % more or 11 l.
      Rear axle standard operating weight 11691 kg and 10301.1 kg 12 % more or 1389.9 kg
      Circular gearbox fluid volume 7 l. and 3.8 l. 46 % more or 3.2 l.

      Motor

      Effective drives torque 7-8 1140 Nm and 924.7 Nm 19 % more or 215.3 Nm
      Effective speeds output 1-2 134.2 kW and 123 kW 8 % more or 11.2 kW
      Displacement 10.3 l. and 8.1 l. 21 % more or 2.2 l.
      Effective speeds output 3-4 149.1 kW and 138 kW 7 % more or 11.1 kW
      Power measured at 2000 rev / min and 1900 rev / min 5 % more or 100 rev
      Torque measured at 1000 rev / min and 900 rev / min 10 % more or 100 rev

      Gear box

      Maximum forward speed 43.6 km/h and 41.5 km/h 5 % more or 2.1 km/h

      Dump

      Blade pulling at maximum weight 20071 kg and 12696.1 kg 37 % more or 7374.9 kg

      15 reasons to buy John Deere 770CH:

      Steerage

      Turn radius 6.7 m and 7.4 m 9 % less or 0.7 m

      Operation

      Each tandem case fluid volume 75 l. and 64 l. 15 % more or 11 l.
      Fuel Capacity 401.3 l. and 397 l. 1 % more or 4.3 l.
      Generator current strength 55 amperes and 35 amperes 36 % more or 20 amperes
      Cooling system fluid volume 45.4 l. and 38 l. 16 % more or 7.4 l.

      Motor

      Effective speeds output 5-6 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Effective speeds output 7-8 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Maximum power 152.9 kW and 149.1 kW 2 % more or 3.8 kW

      Hydraulic system

      Pump flow rate 207.1 l/min and 260 l/min 20 % less or 52.9 l/min

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Maximum reverse gear 41.5 km/h and 34.4 km/h 17 % more or 7.1 km/h

      Circle

      Maximum radius outside left tyres 2160 mm and 2223 mm 3 % less or 63 mm
      Right maximum radius outside tyres 2110 mm and 2261 mm 7 % less or 151 mm
      Maximum lifting above ground level 470 mm and 452 mm 4 % more or 18 mm
      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3356 mm and 3120 mm
      Dimensional length 10097 mm and 8610 mm
      Between tyres width 2460 mm and 2510 mm
      Wheelbase 6169 mm and 5970 mm
      Dual axis wheelbase 1523 mm and 1540 mm

      Operation

      Tyre size 10-24 12PR and 14.00-24
      Total maximum operating weight 23281 kg and 16433.7 kg
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16280 kg and 14288.2 kg

      Motor

      Manufacturer Caterpillar and John Deere
      Model 3176C ATAAC and 6081H
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 24150 kPa and 17581.6 kPa
      Type of pump Axial-piston pump and variable displacement with locking in the middle position

      Gear box

      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard width 4267 mm and 3657.6 mm
      Mouldboard height 686 mm and 609.6 mm
      Mouldboard thickness 25 mm and 22.4 mm
      Left lateral displacement 851 mm and 683 mm
      Lateral right shift 943 mm and 683 mm

      Circle

      Left shift 848 mm and 787 mm
      Right shift 881 mm and 724 mm
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 10097 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3356 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 6169 mm 4. Wheelbase 5970 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1540 mm