vs.

      Caterpillar 160M2 vs. Champion C86C

      4 reasons to buy Caterpillar 160M2:

      Motor

      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 46.7 km/h and 32 km/h 31 % more or 14.7 km/h
      Maximum reverse gear 36.9 km/h and 32 km/h 13 % more or 4.9 km/h

      Circle

      Maximum radius outside left tyres 2090 mm and 2210 mm 5 % less or 120 mm

      5 reasons to buy Champion C86C:

      Steerage

      Turn radius 2.7 m and 7.8 m 65 % less or 5.1 m

      Motor

      Power measured at 2500 rev / min and 2100 rev / min 16 % more or 400 rev

      Circle

      Right maximum radius outside tyres 2210 mm and 2278 mm 3 % less or 68 mm
      Maximum lifting above ground level 508 mm and 452 mm 11 % more or 56 mm
      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 27 degrees

      Sizes

      Between tyres width 2581 mm and 2362 mm
      Height to cab upper part 3287 mm and 2896 mm
      Dimensional length 8898 mm and 6350 mm

      Operation

      Overall standard operating weight 17295.9 kg and 7030 kg

      Motor

      Manufacturer Caterpillar and Cummins
      Model C9.3 ACERT VHP and 4BT3.9

      Gear box

      Transmission type Powershift transmission with direct drive and Hydro-Static Transmission

      Front Axle

      Wheel tilt 18 degrees and 15 degrees
      General fluctuations 32 degrees and 35 degrees

      Dump

      Mouldboard height 609.6 mm and 483 mm
      Mouldboard thickness 22 mm and 16 mm
      Mouldboard width 4267.2 mm and 3353 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 8898 mm 1. Dimensional length 6350 mm
      2. Between tyres width 2581 mm 2. Between tyres width 2362 mm
      3. Height to cab upper part 3287 mm 3. Height to cab upper part 2896 mm