vs.

      Caterpillar 160M2 vs. John Deere 772AH

      20 reasons to buy Caterpillar 160M2:

      Sizes

      Front part clearance 600 mm and 572 mm 5 % more or 28 mm

      Operation

      Rear axle standard operating weight 13059.8 kg and 9827.5 kg 25 % more or 3232.3 kg
      Front axle standard operating weight 4236.1 kg and 4189.8 kg 1 % more or 46.3 kg
      Generator current strength 150 amperes and 42 amperes 72 % more or 108 amperes
      Front axle maximum operating weight 6052.3 kg and 4436.1 kg 27 % more or 1616.2 kg
      Rear axle maximum operating weight 16530.7 kg and 11209.2 kg 32 % more or 5321.5 kg
      Fuel Capacity 416.4 l. and 265 l. 36 % more or 151.4 l.
      Oil system fluid volume 29.9 l. and 18.9 l. 37 % more or 11.0 l.
      Cooling system fluid volume 56 l. and 26.5 l. 53 % more or 29.5 l.
      Circular gearbox fluid volume 6.8 l. and 3.8 l. 44 % more or 3.0 l.
      Each tandem case fluid volume 64 l. and 18.9 l. 70 % more or 45.1 l.

      Motor

      Torque measured at 2100 rev / min and 1400 rev / min 33 % more or 700 rev
      Effective speeds output 7-8 181.2 kW and 134.2 kW 26 % more or 47.0 kW
      Effective drives torque 7-8 1355.8 Nm and 728.1 Nm 46 % more or 627.7 Nm

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.7 km/h and 40.4 km/h 13 % more or 6.3 km/h
      Maximum reverse gear 36.9 km/h and 13.8 km/h 63 % more or 23.1 km/h

      Front Axle

      Clearance 600 mm and 572 mm 5 % more or 28 mm

      Circle

      Maximum radius outside left tyres 2090 mm and 2280 mm 8 % less or 190 mm
      Maximum lifting above ground level 452 mm and 432 mm 4 % more or 20 mm

      7 reasons to buy John Deere 772AH:

      Steerage

      Turn radius 6.9 m and 7.8 m 12 % less or 0.9 m

      Operation

      Hydraulic system fluid volume 155.2 l. and 99.9 l. 36 % more or 55.3 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 136.3 l/min and 210.1 l/min 35 % less or 73.8 l/min

      Circle

      Right maximum radius outside tyres 2250 mm and 2278 mm 1 % less or 28 mm
      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Blade base 2557 mm and 2720 mm
      Dual axis wheelbase 1523 mm and 1540 mm
      Height to cab upper part 3287 mm and 3200 mm
      Dimensional length 8898 mm and 8470 mm
      Between tyres width 2581 mm and 2440 mm
      Wheelbase 6126 mm and 5970 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 17295.9 kg and 14017.4 kg
      Total maximum operating weight 23947.4 kg and 15645.3 kg

      Motor

      Manufacturer Caterpillar and John Deere
      Model C9.3 ACERT VHP and 6-466A
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Forward gears number 8 and 8
      Transmission type Powershift transmission with direct drive and powershift

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Left lateral displacement 510 mm and 683 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Lateral right shift 660 mm and 683 mm
      Mouldboard width 4267.2 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 609.6 mm

      Circle

      Diameter 1530 mm and 1500 mm
      Rotating 360 degrees and 360 degrees
      Left shift 695 mm and 851 mm
      Right shift 728 mm and 813 mm

      Images

      Sizes

      8. Blade base 2557 mm 8. Blade base 2720 mm
      1. Dimensional length 8898 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2581 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3287 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6126 mm 4. Wheelbase 5970 mm
      6. Front part clearance 600 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1540 mm