vs.

      Caterpillar 160M2 vs. New Holland F156.6

      17 reasons to buy Caterpillar 160M2:

      Steerage

      Turn radius 7.8 m and 8250 m 100 % less or 8242.2 m

      Sizes

      Rear ground clearance 344 mm and 328 mm 5 % more or 16 mm
      Front part clearance 600 mm and 141 mm 76 % more or 459 mm

      Operation

      Front axle maximum operating weight 6052.3 kg and 5200 kg 14 % more or 852.3 kg
      Rear axle maximum operating weight 16530.7 kg and 11500 kg 30 % more or 5030.7 kg
      Oil system fluid volume 29.9 l. and 12.5 l. 58 % more or 17.4 l.
      Fuel Capacity 416.4 l. and 275 l. 34 % more or 141.4 l.
      Transmission fluid volume 65.1 l. and 21 l. 68 % more or 44.1 l.
      Generator current strength 150 amperes and 70 amperes 53 % more or 80 amperes
      Rear axle standard operating weight 13059.8 kg and 9841 kg 25 % more or 3218.8 kg

      Gear box

      Maximum reverse gear 36.9 km/h and 27.1 km/h 27 % more or 9.8 km/h
      Maximum forward speed 46.7 km/h and 37.4 km/h 20 % more or 9.3 km/h
      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 6 and 3 50 % more or 3

      Dump

      Maximum cutting depth 750 mm and 500 mm 33 % more or 250 mm

      Circle

      Maximum radius outside left tyres 2090 mm and 2520 mm 17 % less or 430 mm
      Right maximum radius outside tyres 2278 mm and 3210 mm 29 % less or 932 mm

      6 reasons to buy New Holland F156.6:

      Operation

      Hydraulic system fluid volume 185 l. and 99.9 l. 46 % more or 85.1 l.
      Each tandem case fluid volume 68 l. and 64 l. 6 % more or 4 l.
      Front axle standard operating weight 4496 kg and 4236.1 kg 6 % more or 259.9 kg

      Hydraulic system

      Pump flow rate 126 l/min and 210.1 l/min 40 % less or 84.1 l/min

      Front Axle

      Clearance 646 mm and 600 mm 7 % more or 46 mm

      Circle

      Maximum lifting above ground level 480 mm and 452 mm 6 % more or 28 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 28 degrees

      Sizes

      Dual axis wheelbase 1523 mm and 1544 mm
      Dimensional length 8898 mm and 9975 mm
      Between tyres width 2581 mm and 2595 mm
      Wheelbase 6126 mm and 5983 mm
      Blade base 2557 mm and 2504 mm
      Height to cab upper part 3287 mm and 3373 mm

      Operation

      Overall standard operating weight 17295.9 kg and 14336 kg
      Total maximum operating weight 23947.4 kg and 16200 kg
      Operating voltage 24 V and 24 V

      Motor

      Model C9.3 ACERT VHP and CNH 4-stroke cycle, naturally aspirated diesel engine
      Power measured at 2100 rev / min and 2100 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and Axial cam pump, variable displacement piston pump
      Overflow valve pressure 24152.3 kPa and 20000 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission

      Front Axle

      Wheel tilt 18 degrees and 21 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard height 609.6 mm and 152 mm
      Mouldboard thickness 22 mm and 19 mm
      Left lateral displacement 510 mm and 645 mm
      Lateral right shift 660 mm and 755 mm
      Mouldboard width 4267.2 mm and 3660 mm

      Circle

      Rotating 360 degrees and degrees
      Left shift 695 mm and 645 mm
      Right shift 728 mm and 755 mm

      Images

      Sizes

      1. Dimensional length 8898 mm 1. Dimensional length 9975 mm
      2. Between tyres width 2581 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 3287 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 6126 mm 4. Wheelbase 5983 mm
      5. Rear ground clearance 344 mm 5. Rear ground clearance 328 mm
      6. Front part clearance 600 mm 6. Front part clearance 141 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1544 mm
      8. Blade base 2557 mm 8. Blade base 2504 mm