vs.

      Caterpillar 160M2 vs. Volvo G726B

      13 reasons to buy Caterpillar 160M2:

      Operation

      Rear axle standard operating weight 13059.8 kg and 11401 kg 13 % more or 1658.8 kg
      Cooling system fluid volume 56 l. and 28 l. 50 % more or 28 l.
      Transmission fluid volume 65.1 l. and 38 l. 42 % more or 27.1 l.
      Fuel Capacity 416.4 l. and 378.5 l. 9 % more or 37.9 l.
      Generator current strength 150 amperes and 80 amperes 47 % more or 70 amperes

      Motor

      Torque measured at 2100 rev / min and 1400 rev / min 33 % more or 700 rev
      Effective speeds output 7-8 181.2 kW and 175.2 kW 3 % more or 6.0 kW
      Effective drives torque 7-8 1355.8 Nm and 1049.4 Nm 23 % more or 306.4 Nm

      Hydraulic system

      Pump flow rate 210.1 l/min and 284 l/min 26 % less or 73.9 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.7 km/h and 45.9 km/h 2 % more or 0.8 km/h
      Maximum reverse gear 36.9 km/h and 32.8 km/h 11 % more or 4.1 km/h

      Circle

      Maximum lifting above ground level 452 mm and 444.5 mm 2 % more or 7.5 mm

      11 reasons to buy Volvo G726B:

      Operation

      Front axle standard operating weight 4657 kg and 4236.1 kg 9 % more or 420.9 kg
      Hydraulic system fluid volume 134 l. and 99.9 l. 25 % more or 34.1 l.
      Each tandem case fluid volume 100 l. and 64 l. 36 % more or 36 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Front Axle

      Clearance 610 mm and 600 mm 2 % more or 10 mm

      Dump

      Maximum cutting depth 812.8 mm and 750 mm 8 % more or 62.8 mm
      Blade pulling at maximum weight 10260.7 kg and 9091.8 kg 11 % more or 1168.9 kg

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2090 mm 3 % less or 70.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2278 mm 12 % less or 271.4 mm
      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 22 degrees

      Sizes

      Between tyres width 2581 mm and 2540 mm
      Wheelbase 6126 mm and 6096 mm
      Blade base 2557 mm and 2591 mm
      Height to cab upper part 3287 mm and 3099 mm
      Dimensional length 8898 mm and 9119 mm

      Operation

      Overall standard operating weight 17295.9 kg and 16057 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Caterpillar and Volvo
      Model C9.3 ACERT VHP and D7DGDE2
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and hydraulic system with load sensing
      Overflow valve pressure 24152.3 kPa and 2700 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 32 degrees and 16 degrees
      Wheel tilt 18 degrees and 15 degrees

      Dump

      Left lateral displacement 510 mm and 673.1 mm
      Lateral right shift 660 mm and 673.1 mm
      Lowered blade pressure 10380 kg and 8098.4 kg
      Mouldboard width 4267.2 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 635 mm
      Mouldboard thickness 22 mm and 22.2 mm

      Circle

      Diameter 1530 mm and 1683 mm
      Rotating 360 degrees and 360 degrees
      Left shift 695 mm and 774.7 mm
      Right shift 728 mm and 749.3 mm

      Images

      Sizes

      1. Dimensional length 8898 mm 1. Dimensional length 9119 mm
      2. Between tyres width 2581 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3287 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6126 mm 4. Wheelbase 6096 mm
      8. Blade base 2557 mm 8. Blade base 2591 mm